Exchange Currencies Track Order Guides Telegram bot

Swap Tether (USDT) to Solayer (LAYER) with no sign-up

Enter the USDT amount, paste a Solana wallet address from your own wallet, then send USDT on TRON to the one-time deposit address on your order page. Once the TRON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LAYER on Solana straight to your address.

Swap LAYER to USDT instead

Network Fee
-
Deposit Fee
-

Enter an address on the Solana (SPL) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDT to LAYER exchange rate

The USDT to LAYER rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USDT to LAYER Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDT TRON TRC-20
You get (estimate)
LAYER Solana SPL
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 21:59 UTC
1 USDT price
$1.00

How to swap USDT to LAYER

  1. Copy your LAYER address

    Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDT amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LAYER estimate under it already has the payout fee taken out.

  3. Send USDT to the deposit address

    Press Exchange Now. Your order page shows a one-time TRON deposit address: send the amount you entered in one transaction. Send from a TRON wallet that holds TRX for the fee, because a TRON transfer burns TRX when your Bandwidth or Energy does not cover it.

  4. Follow the order until LAYER arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LAYER is in your wallet.

What the USDT to LAYER swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. You pay the TRON network fee from the sending address: the transfer uses Bandwidth from your staked or delegated TRX or the free allowance, and if neither covers the whole transfer, TRX is burned for all of it. A USDT transfer runs the token's contract and needs Energy, which has no free allowance: without staked or delegated Energy, the network burns TRX for it, more when the receiver holds none of the token.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LAYER you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDT to LAYER at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Tether (TRC20) (USDT) Solayer (LAYER)
Network TRON Solana
Type TRC-20 token SPL token
Contract TR7NHqje…gjLj6t LAYER4xP…wY2Yzc
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 4.956 USDT -
Route Cross-chain: TRON to Solana
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 10.930827 USDT
Account / ID Not needed to start a swap

How long the USDT to LAYER swap takes

The USDT to LAYER swap is three waits in a row: the TRON network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. TRON schedules a block every 3 seconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.

  2. TRON solidifies the deposit

    A block is final once at least 19 of TRON's 27 block producers have produced blocks at or above its height, typically about a minute later.

  3. Exchange and LAYER payout

    The partner swaps the USDT and sends LAYER. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Solana

    Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the LAYER under your address.

Your LAYER address for the payout

A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
  • An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.

Receiving LAYER on Solana: address and memo

Memo or tagNot used on this network.
Block explorersolscan.io

More about swapping on Solana

Send USDT on the right network

On the sending side, send USDT only on TRON, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the LAYER arrives

The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. LAYER arrives in a token account tied to your wallet address; if you have never held LAYER, the payout has to create that account, and your wallet needs no SOL to receive it.

If the address belongs to an exchange, check that it is the exchange's deposit address for LAYER on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.

If your USDT deposit is slow or stuck

Look up the transaction ID on Tronscan. If a token transfer shows as failed, for example with OUT_OF_ENERGY, no tokens moved, but the Energy it used is still charged and not refunded. A failed transaction stays failed, so add TRX or Energy, or raise the fee limit if your wallet allows it, and then send again.

If Tronscan cannot find the transaction ID, the network may have dropped it, since TRON drops a transaction that is not in a block by its expiration time. Send again only once your wallet reports it expired and your balance still holds the amount: until it expires, the first one could still land, and you would pay twice.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDT to LAYER swap

Your deposit is public on TRON: anyone can look up the sending and deposit addresses, the amount, and the TRX or resources the transfer used on Tronscan. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep spare TRX in the sending address for the fee, because a token transfer that runs out of Energy fails and the TRX it burned is not refunded.
  • Copy your LAYER address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDT to LAYER Frequently Asked Questions

How do I swap USDT to LAYER?

Enter the USDT amount and your LAYER address in the form at the top, press Exchange Now, and send USDT on TRON to the one-time deposit address on your order page. After the TRON network confirms the deposit, the exchange partner sends LAYER on Solana to your address. No account or email is needed.

How much LAYER do I get for 1 USDT?

Type 1 into the USDT to LAYER calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USDT to LAYER take?

There is no set time: the TRON network confirms the deposit first, then the exchange partner swaps it and sends the LAYER payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDT to LAYER?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Tether to Solayer without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the LAYER I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.

How do I swap LAYER back to USDT?

Use the LAYER to USDT page, linked next to the swap form. It works the same way in reverse: paste a TRON address, then send LAYER to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps