Swap Tether (USDT) to Monero (XMR) with no sign-up
Enter the USDT amount, paste a Monero address from your own wallet, then send USDT on Ethereum to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XMR straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDT to XMR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDT amounts come to in XMR after fees. It is worked out from the page's latest quote and carries that quote's time.
USDT to XMR Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDTEthereumERC-20
You get (estimate)
XMRMonero
Rate
1 USDT ≈ 0.00192042 XMR
Value in USD
≈ $96.12
Network Fee
0.009 XMR
USDT to XMR conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 03:32 UTC
1 USDT price
$1.00
1 XMR price
$500.52
1 USDT buys
0.00192042 XMR
How to swap USDT to XMR
1
Copy your XMR address
Open your Monero wallet's Receive screen and copy a subaddress, which starts with 8; the primary address, starting with 4, works too, and both are 95 characters long. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDT amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XMR estimate under it already has the payout fee taken out.
3
Send USDT to the deposit address
Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.
4
Follow the order until XMR arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XMR is in your wallet.
About Swapping Tether (ERC20) to Monero
This pair takes Tether (USDT) as an ERC-20 token from your Ethereum wallet and pays out Monero (XMR) on the Monero blockchain to a wallet address you generated yourself. Signup is not part of it. The typical reason to swap USDT to XMR is privacy for future payments: on Ethereum every transfer and balance is public, while Monero hides senders, receivers and amounts on its own chain once the coins are there.
Tether's USDT keeps a dollar peg and this page accepts the Ethereum token at 0xdAC17F958D2ee523a2206206994597C13D831ec7, which costs ETH in gas to move. Monero is a proof-of-work coin mined with the RandomX algorithm, and it hides the sender, receiver and amount of every transfer by default, giving each payment a one-time stealth address. Ethereum to Monero is a cross-chain swap. A standard Monero address starts with 4, a subaddress with 8, both 95 characters long. No memo or payment ID is needed.
What you see before sending is a floating-rate estimate of the XMR you will receive, already reduced by the Monero network fee for the payout. If prices move before the USDT deposit confirms, the result can shift slightly. Ethereum produces a block every 12 seconds and Monero targets one about every two minutes, and both affect the timeline. Newly received XMR stays locked in your wallet for a short time before you can spend it. The order page shows live status.
What the USDT to XMR swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Monero network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. An ERC-20 transfer runs the token's contract, so it uses more gas than a plain ETH transfer, and that gas is paid in ETH.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XMR you get per USDT drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDT to XMR at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Tether (ERC20) (USDT)
Monero (XMR)
Network
Ethereum
Monero
Type
ERC-20 token
Native coin
Contract
0xdAC17F…831ec7
-
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.3411 USDT
≈ 0.009 XMR
Route
Cross-chain: Ethereum to Monero
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
10.383155 USDT
Account / ID
Not needed to start a swap
How long the USDT to XMR swap takes
The USDT to XMR swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the Monero network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDT, and the order page moves from waiting to confirming once the deposit is found.
2Ethereum includes it in a block
Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.
3Exchange and XMR payout
The partner swaps the USDT and sends XMR. The status reaches sending, then finished, and the payout hash appears on the order page.
4The 10-block lock ends
Once the payout is in a block, a synced wallet lists it as locked. After 10 blocks, about 20 minutes on average, the XMR counts as spendable balance.
Your XMR address for the payout
A Monero standard address is 95 characters and starts with 4. A subaddress is also 95 characters and starts with 8. An integrated address is 106 characters, starts with 4 and has a payment ID built in. The swap form accepted all three types in our checks.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
Using an exchange address that needs a separate payment ID, which this form cannot pass on.
Paying out to a new Monero wallet before writing down its seed phrase: without it, the XMR cannot be restored if the device or wallet file is lost.
On the sending side, send USDT only on Ethereum, the network your order page names. USDT sent on another network does not reach the deposit address. USDT exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
Monero locks every received output for 10 blocks after the transaction is mined, about 20 minutes on average, and your wallet shows the amount as locked until then. It is a consensus rule of the network, not a hold by the swap, and it applies again to your change whenever you send XMR later.
A wallet that scans the chain on your device finds the payout once it is open and has synced past the payout block. If you restored the wallet from its seed, its restore height must be below the payout block, or the wallet skips the transaction. A block explorer cannot show your balance, because the payout goes to a one-time stealth address and the amount is hidden.
Use an exchange address only if that exchange still accepts XMR deposits in your region and gives you one complete address; if it asks for a separate payment ID next to a normal address, use your own wallet instead. To check the payout yourself, open the payout hash from the order page in a Monero explorer such as xmrchain.net.
If your USDT deposit is slow or stuck
Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDT to XMR swap
Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. On Monero, outside observers cannot read the payout amount or your receiving address; the chain still shows that a transaction exists, with its block and fee. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Generate a fresh Monero subaddress in your own wallet and paste it as the receiving address, checking the first and last characters.
Let your Monero wallet finish syncing before you judge whether the payout arrived, because an unsynced wallet shows an old balance.
Keep enough ETH for gas in the wallet that sends the ERC-20 USDT deposit.
Remember that your USDT deposit transaction stays public on Ethereum, so send it from a wallet you are comfortable having linked to this order.
Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
USDT to XMR Frequently Asked Questions
How do I swap USDT to XMR?
Enter the USDT amount and your XMR address in the form at the top, press Exchange Now, and send USDT on Ethereum to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends XMR to your address. No account or email is needed.
How much XMR do I get for 1 USDT?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDT to XMR calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDT to XMR take?
There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the XMR payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDT to XMR?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Tether to Monero without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the XMR I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDT arrived than you entered.
How do I swap XMR back to USDT?
Use the XMR to USDT page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send XMR to the one-time deposit address.
How private is a USDT to XMR exchange?
Only partly private. The USDT deposit is a normal Ethereum transaction that anyone can see on a block explorer, linked to your sending address. Once the XMR lands, Monero hides the amount and the receiving address on-chain. The order itself is not anonymous: the order details and transaction ID exist on the exchange side.
Which Monero address formats work for the payout?
A primary address starting with 4 or a subaddress starting with 8, each 95 characters, both work. Many Monero wallets create subaddresses on request, which keeps separate payments easier to tell apart. An address from any other chain is not valid here, so copy it straight from your Monero wallet.
Why can't I spend the XMR right after it arrives?
Monero locks newly received outputs for a short period as a protocol rule, so your wallet may show the balance as locked or pending. This clears by itself after more blocks are added. Monero targets one block roughly every two minutes.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.