Swap Chainlink (LINK) to Solayer (LAYER) with no sign-up
Enter the LINK amount, paste a Solana wallet address from your own wallet, then send LINK on Polygon PoS to the one-time deposit address on your order page. Once the Polygon PoS network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LAYER on Solana straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The LINK to LAYER rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
LINK to LAYER Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
LINKPolygonERC-20
You get (estimate)
LAYERSolanaSPL
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 23:02 UTC
1 LINK price
$9.13
How to swap LINK to LAYER
1
Copy your LAYER address
Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.
2
Enter the LINK amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LAYER estimate under it already has the payout fee taken out.
3
Send LINK to the deposit address
Press Exchange Now. Your order page shows a one-time Polygon PoS deposit address: send the amount you entered in one transaction. Send from a wallet set to Polygon PoS that holds enough POL for gas; some wallets still label that balance MATIC.
4
Follow the order until LAYER arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LAYER is in your wallet.
What the LINK to LAYER swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. You pay the Polygon PoS gas fee yourself, in POL: the gas the transfer uses times the base fee plus a tip, and most wallets suggest both. A token transfer on Polygon PoS runs the token's contract, so it uses more gas than a plain POL transfer, and that gas is paid in POL.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LAYER you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
LINK to LAYER at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Chainlink (Polygon) (LINK)
Solayer (LAYER)
Network
Polygon PoS
Solana
Type
ERC-20 token
SPL token
Contract
0x53E0bc…aBad39
LAYER4xP…wY2Yzc
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.001443 LINK
-
Route
Cross-chain: Polygon PoS to Solana
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0014394 LINK
Account / ID
Not needed to start a swap
How long the LINK to LAYER swap takes
The LINK to LAYER swap is three waits in a row: the Polygon PoS network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. Polygon PoS finalizes blocks with milestones once validators holding two thirds of the stake agree, and a finalized block cannot be reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.
2Polygon PoS milestones finalize it
A deposit whose max fee is below the base fee, or that waits behind an earlier pending transaction, can stay pending until you speed it up.
3Exchange and LAYER payout
The partner swaps the LINK and sends LAYER. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Solana
Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the LAYER under your address.
Your LAYER address for the payout
A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.
On the sending side, send LINK only on Polygon PoS, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. LAYER arrives in a token account tied to your wallet address; if you have never held LAYER, the payout has to create that account, and your wallet needs no SOL to receive it.
If the address belongs to an exchange, check that it is the exchange's deposit address for LAYER on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.
If your LINK deposit is slow or stuck
Look up the transaction hash on PolygonScan. A deposit that stays pending usually has a max fee below the current base fee, which every transaction must pay, or a tip too small to be picked. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If PolygonScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your LINK to LAYER swap
Your deposit is public on Polygon PoS: your sending address, the deposit address, the amount and the fee show on PolygonScan, and they stay there. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Keep some POL on Polygon PoS for gas and check which network your wallet is on, since POL also exists as a token on Ethereum.
Copy your LAYER address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
LINK to LAYER Frequently Asked Questions
How do I swap LINK to LAYER?
Enter the LINK amount and your LAYER address in the form at the top, press Exchange Now, and send LINK on Polygon PoS to the one-time deposit address on your order page. After the Polygon PoS network confirms the deposit, the exchange partner sends LAYER on Solana to your address. No account or email is needed.
How much LAYER do I get for 1 LINK?
Type 1 into the LINK to LAYER calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does LINK to LAYER take?
There is no set time: the Polygon PoS network confirms the deposit first, then the exchange partner swaps it and sends the LAYER payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for LINK to LAYER?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Chainlink to Solayer without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the LAYER I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.
How do I swap LAYER back to LINK?
Use the LAYER to LINK page, linked next to the swap form. It works the same way in reverse: paste a Polygon PoS address, then send LAYER to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.