Enter the XRP amount, paste an Ethereum address from your own wallet, then send XRP to the one-time deposit address on your order page. Once the XRP Ledger network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends API3 on Ethereum straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The XRP to API3 rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several XRP amounts come to in API3 after fees. It is worked out from the page's latest quote and carries that quote's time.
XRP to API3 Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
XRPXRP Ledger
You get (estimate)
API3EthereumERC-20
Rate
1 XRP ≈ 5.39638 API3
Value in USD
≈ $93.38
Network Fee
0.4223953 API3
XRP to API3 conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 16:27 UTC
1 XRP price
$0.9527
1 API3 price
$0.1730
1 XRP buys
5.39638023 API3
How to swap XRP to API3
1
Copy your API3 address
Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the XRP amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The API3 estimate under it already has the payout fee taken out.
3
Send XRP to the deposit address
Press Exchange Now. Your order page shows a one-time XRP Ledger deposit address: send the amount you entered in one transaction. Send from an XRP Ledger wallet that holds the amount and, on top of it, the account reserve in XRP, since reserved XRP cannot be sent to others. Add the destination tag shown on the order page, because a deposit without it cannot be matched to your order.
4
Follow the order until API3 arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the API3 is in your wallet.
What the XRP to API3 swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the XRP Ledger transaction cost yourself, in XRP: your wallet normally fills it in from the current network load, and the network destroys it instead of paying it to anyone.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the API3 you get per XRP drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
XRP to API3 at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
XRP
API3
Network
XRP Ledger
Ethereum
Type
Native coin
ERC-20 token
Contract
-
0x0b3821…31B88a
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 22, 2026)
None listed
-
Route
Cross-chain: XRP Ledger to Ethereum
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.167234 XRP
Account / ID
Not needed to start a swap
How long the XRP to API3 swap takes
The XRP to API3 swap is three waits in a row: the XRP Ledger network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. The XRP Ledger closes a new ledger version every few seconds, and a payment in a validated ledger is final and can no longer change; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the XRP, and the order page moves from waiting to confirming once the deposit is found.
2The XRP Ledger validates it
Most payments are validated or rejected within seconds, and once a validated ledger includes yours, the result is final.
3Exchange and API3 payout
The partner swaps the XRP and sends API3. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Ethereum
Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.
Your API3 address for the payout
An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for API3 on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.
The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the API3 later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.
If the address belongs to an exchange, check that the exchange credits API3 on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.
If your XRP deposit is slow or stuck
Look up the transaction hash on an XRP Ledger explorer such as livenet.xrpl.org, where a payment usually shows its result within seconds. A result code that starts with tec means the payment failed and delivered nothing, though its fee was still destroyed; tecDST_TAG_NEEDED, for example, means the destination tag was missing. After such a failure you can send a new payment, with the tag if the order page shows one. A payment with no result yet can be queued when the network's transaction cost rises; if your wallet gave it a last valid ledger, it expires once that ledger has passed.
Without the destination tag shown on the order page, a deposit is either rejected by the ledger, when the deposit account requires a tag, or arrives with nothing that matches it to your order. If it arrived, message support with the transaction hash instead of sending again. The ledger cannot tell whether a tag is the right one, so copy the number exactly.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your XRP to API3 swap
Your deposit is public: the sending address, the deposit address, the amount, any destination tag and the time stay in the XRP Ledger's history, where anyone can look them up. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
When you choose the amount, leave the account reserve in your XRP Ledger wallet, because a payment that would send reserved XRP fails.
Copy your API3 address from the wallet's receive screen and compare its start and end after pasting.
Add the destination tag from the order page when you send XRP, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
XRP to API3 Frequently Asked Questions
How do I swap XRP to API3?
Enter the XRP amount and your API3 address in the form at the top, press Exchange Now, and send XRP to the one-time deposit address on your order page. After the XRP Ledger network confirms the deposit, the exchange partner sends API3 on Ethereum to your address. No account or email is needed.
How much API3 do I get for 1 XRP?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the XRP to API3 calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does XRP to API3 take?
There is no set time: the XRP Ledger network confirms the deposit first, then the exchange partner swaps it and sends the API3 payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for XRP to API3?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap XRP to api3 without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap XRP to API3?
For the deposit, yes: the order page shows a destination tag next to the deposit address, and your XRP must carry it to be matched to your order.
Why is the API3 I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less XRP arrived than you entered.
How do I swap API3 back to XRP?
Use the API3 to XRP page, linked next to the swap form. It works the same way in reverse: paste an XRP Ledger address, then send API3 to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.