Exchange Currencies Track Order Guides Telegram bot

Swap Ethena USDe (USDE) to Parcl (PRCL) with no sign-up

Enter the USDE amount, paste a Solana wallet address from your own wallet, then send USDE on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends PRCL on Solana straight to your address.

Swap PRCL to USDE instead

Network Fee
-
Deposit Fee
-

Enter an address on the Solana (SPL) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

USDE to PRCL exchange rate

The USDE to PRCL rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

USDE to PRCL Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

USDE TON Jetton
You get (estimate)
PRCL Solana SPL
0
Rate
-
Value in USD
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 22:21 UTC
1 USDE price
$0.7157
1 PRCL price
$0.0047984

How to swap USDE to PRCL

  1. Copy your PRCL address

    Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the USDE amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The PRCL estimate under it already has the payout fee taken out.

  3. Send USDE to the deposit address

    Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.

  4. Follow the order until PRCL arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the PRCL is in your wallet.

What the USDE to PRCL swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDE also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the PRCL you get per USDE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

USDE to PRCL at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ethena USDe (Ton) (USDE) Parcl (PRCL)
Network TON Solana
Type Jetton token SPL token
Contract EQAIb6Km…2dzP5f 4LLbsb5R…VC2AHs
Memo / tag Include the memo shown on your order page Not needed
Network fee (typical, checked Nov 22, 2026) - ≈ 38.39 PRCL
Route Cross-chain: TON to Solana
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.199641 USDE
Account / ID Not needed to start a swap

How long the USDE to PRCL swap takes

The USDE to PRCL swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the USDE, and the order page moves from waiting to confirming once the deposit is found.

  2. Masterchain block makes it final

    A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.

  3. Exchange and PRCL payout

    The partner swaps the USDE and sends PRCL. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Solana

    Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the PRCL under your address.

Your PRCL address for the payout

A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
  • An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.

Receiving PRCL on Solana: address and memo

Memo or tagNot used on this network.
Block explorersolscan.io

More about swapping on Solana

Send USDE on the right network

On the sending side, send USDE only on TON, the network your order page names. USDE sent on another network does not reach the deposit address. USDE exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the PRCL arrives

The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. PRCL arrives in a token account tied to your wallet address; if you have never held PRCL, the payout has to create that account, and your wallet needs no SOL to receive it.

If the address belongs to an exchange, check that it is the exchange's deposit address for PRCL on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.

If your USDE deposit is slow or stuck

A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.

If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your USDE to PRCL swap

Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
  • Copy your PRCL address from the wallet's receive screen and compare its start and end after pasting.
  • If the order page shows a memo with the deposit address, add it when you send USDE, or the deposit cannot be matched.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

USDE to PRCL Frequently Asked Questions

How do I swap USDE to PRCL?

Enter the USDE amount and your PRCL address in the form at the top, press Exchange Now, and send USDE on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends PRCL on Solana to your address. No account or email is needed.

How much PRCL do I get for 1 USDE?

Type 1 into the USDE to PRCL calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does USDE to PRCL take?

There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the PRCL payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for USDE to PRCL?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ethena USDe to Parcl without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap USDE to PRCL?

For the deposit, only if the order page shows a memo next to the deposit address: your USDE must then carry it to be matched to your order.

Why is the PRCL I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDE arrived than you entered.

How do I swap PRCL back to USDE?

Use the PRCL to USDE page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send PRCL to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps