Swap Ethena USDe (USDE) to Act I : The AI Prophecy (ACT) with no sign-up
Enter the USDE amount, paste a Solana wallet address from your own wallet, then send USDE on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ACT on Solana straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDE to ACT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
USDE to ACT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDETONJetton
You get (estimate)
ACTSolanaSPL
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 23:19 UTC
1 USDE price
$0.7157
1 ACT price
$0.00894028
How to swap USDE to ACT
1
Copy your ACT address
Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ACT estimate under it already has the payout fee taken out.
3
Send USDE to the deposit address
Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.
4
Follow the order until ACT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ACT is in your wallet.
What the USDE to ACT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as USDE also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ACT you get per USDE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDE to ACT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethena USDe (Ton) (USDE)
Act I : The AI Prophecy (ACT)
Network
TON
Solana
Type
Jetton token
SPL token
Contract
EQAIb6Km…2dzP5f
GJAFwWjJ…Unpump
Memo / tag
Include the memo shown on your order page
Not needed
Network fee (typical, checked Nov 22, 2026)
-
≈ 20.84 ACT
Route
Cross-chain: TON to Solana
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.198639 USDE
Account / ID
Not needed to start a swap
How long the USDE to ACT swap takes
The USDE to ACT swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDE, and the order page moves from waiting to confirming once the deposit is found.
2Masterchain block makes it final
A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.
3Exchange and ACT payout
The partner swaps the USDE and sends ACT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Solana
Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the ACT under your address.
Your ACT address for the payout
A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.
On the sending side, send USDE only on TON, the network your order page names. USDE sent on another network does not reach the deposit address. USDE exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. ACT arrives in a token account tied to your wallet address; if you have never held ACT, the payout has to create that account, and your wallet needs no SOL to receive it.
If the address belongs to an exchange, check that it is the exchange's deposit address for ACT on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.
If your USDE deposit is slow or stuck
A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.
If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDE to ACT swap
Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
Copy your ACT address from the wallet's receive screen and compare its start and end after pasting.
If the order page shows a memo with the deposit address, add it when you send USDE, or the deposit cannot be matched.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDE to ACT Frequently Asked Questions
How do I swap USDE to ACT?
Enter the USDE amount and your ACT address in the form at the top, press Exchange Now, and send USDE on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends ACT on Solana to your address. No account or email is needed.
How much ACT do I get for 1 USDE?
Type 1 into the USDE to ACT calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does USDE to ACT take?
There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the ACT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDE to ACT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethena USDe to Act I : The AI Prophecy without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap USDE to ACT?
For the deposit, only if the order page shows a memo next to the deposit address: your USDE must then carry it to be matched to your order.
Why is the ACT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDE arrived than you entered.
How do I swap ACT back to USDE?
Use the ACT to USDE page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send ACT to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.