Swap World Liberty Financial USD (USD1) to Pump.fun (PUMP) with no sign-up
Enter the USD1 amount, paste a Solana wallet address from your own wallet, then send USD1 on TRON to the one-time deposit address on your order page. Once the TRON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends PUMP on Solana straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USD1 to PUMP rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USD1 amounts come to in PUMP after fees. It is worked out from the page's latest quote and carries that quote's time.
USD1 to PUMP Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USD1TRONTRC-20
You get (estimate)
PUMPSolanaSPL
Rate
1 USD1 ≈ 364.522 PUMP
Value in USD
≈ $96.22
Network Fee
70.3672974 PUMP
USD1 to PUMP conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 17:16 UTC
1 USD1 price
$1.03
1 PUMP price
$0.00263956
1 USD1 buys
364.52238991 PUMP
USD1 to PUMP market price range
Over the last 30 days, 1 USD1 was worth between 160.25 and 258.03 PUMP at market prices. Over the last 90 days the range was 153.34 to 415.91 PUMP.
Aug 9, 2026Low 153.34 · High 415.91 PUMPNov 6, 2026
Market price of 1 USD1 in PUMP over the last 90 days
Based on daily market prices, checked on Nov 7, 2026. This is not your swap rate: the estimate in the swap form includes fees and moves with the market.
How to swap USD1 to PUMP
1
Copy your PUMP address
Open your Solana wallet's receive screen and copy your wallet address, the one address that receives both SOL and every SPL token. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USD1 amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The PUMP estimate under it already has the payout fee taken out.
3
Send USD1 to the deposit address
Press Exchange Now. Your order page shows a one-time TRON deposit address: send the amount you entered in one transaction. Send from a TRON wallet that holds TRX for the fee, because a TRON transfer burns TRX when your Bandwidth or Energy does not cover it.
4
Follow the order until PUMP arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the PUMP is in your wallet.
What the USD1 to PUMP swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Solana network fee for your payout. You pay the TRON network fee from the sending address: the transfer uses Bandwidth from your staked or delegated TRX or the free allowance, and if neither covers the whole transfer, TRX is burned for all of it. A USD1 transfer runs the token's contract and needs Energy, which has no free allowance: without staked or delegated Energy, the network burns TRX for it, more when the receiver holds none of the token.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the PUMP you get per USD1 drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USD1 to PUMP at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
World Liberty Financial USD (TRC20) (USD1)
Pump.fun (PUMP)
Network
TRON
Solana
Type
TRC-20 token
SPL token
Contract
TPFqcBAa…oLR6Rc
pumpCmXq…7H9Dfn
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 4.254 USD1
≈ 77.25 PUMP
Route
Cross-chain: TRON to Solana
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
9.7776827 USD1
Account / ID
Not needed to start a swap
How long the USD1 to PUMP swap takes
The USD1 to PUMP swap is three waits in a row: the TRON network confirms your deposit, the exchange partner swaps it, and the Solana network delivers the payout. TRON schedules a block every 3 seconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USD1, and the order page moves from waiting to confirming once the deposit is found.
2TRON solidifies the deposit
A block is final once at least 19 of TRON's 27 block producers have produced blocks at or above its height, typically about a minute later.
3Exchange and PUMP payout
The partner swaps the USD1 and sends PUMP. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Solana
Once the validators finalize the block holding the payout, it cannot be reversed, and your wallet lists the PUMP under your address.
Your PUMP address for the payout
A Solana address is a base58 string of a 32-byte public key, 32 to 44 characters long, with no 0x prefix. Base58 never uses 0, O, I or l. The same wallet address receives SOL and SPL tokens such as USDT and USDC.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
A token's mint, token account or program address from an explorer: SOL sent to any of them may be lost for good, and a token payout to a mint fails.
An exchange deposit address that needs a memo: this listing sends no memo, so the exchange may not credit the payout.
On the sending side, send USD1 only on TRON, the network your order page names. USD1 sent on another network does not reach the deposit address. USD1 exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is an ordinary Solana transfer to your wallet address. It cannot be reversed once its block is finalized, which Solana's consensus targets within roughly 150 milliseconds, and the coins then sit at that address, whichever wallet app holds its keys. Every later transfer of the coins pays its network fee in SOL, even when you move a token. PUMP arrives in a token account tied to your wallet address; if you have never held PUMP, the payout has to create that account, and your wallet needs no SOL to receive it.
If the address belongs to an exchange, check that it is the exchange's deposit address for PUMP on Solana and what its minimum deposit is; if it asks for a memo, use your own wallet, since this listing sends none. To check the payout yourself, open the payout hash from the order page in a Solana explorer such as Solscan.
If your USD1 deposit is slow or stuck
Look up the transaction ID on Tronscan. If a token transfer shows as failed, for example with OUT_OF_ENERGY, no tokens moved, but the Energy it used is still charged and not refunded. A failed transaction stays failed, so add TRX or Energy, or raise the fee limit if your wallet allows it, and then send again.
If Tronscan cannot find the transaction ID, the network may have dropped it, since TRON drops a transaction that is not in a block by its expiration time. Send again only once your wallet reports it expired and your balance still holds the amount: until it expires, the first one could still land, and you would pay twice.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USD1 to PUMP swap
Your deposit is public on TRON: anyone can look up the sending and deposit addresses, the amount, and the TRX or resources the transfer used on Tronscan. The payout, its amount and your receiving address are visible to anyone in a Solana explorer, along with the other SOL and token balances of that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Keep spare TRX in the sending address for the fee, because a token transfer that runs out of Energy fails and the TRX it burned is not refunded.
Copy your PUMP address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USD1 to PUMP Frequently Asked Questions
How do I swap USD1 to PUMP?
Enter the USD1 amount and your PUMP address in the form at the top, press Exchange Now, and send USD1 on TRON to the one-time deposit address on your order page. After the TRON network confirms the deposit, the exchange partner sends PUMP on Solana to your address. No account or email is needed.
How much PUMP do I get for 1 USD1?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USD1 to PUMP calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USD1 to PUMP take?
There is no set time: the TRON network confirms the deposit first, then the exchange partner swaps it and sends the PUMP payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USD1 to PUMP?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap World Liberty Financial USD to Pump.fun without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the PUMP I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USD1 arrived than you entered.
How do I swap PUMP back to USD1?
Use the PUMP to USD1 page, linked next to the swap form. It works the same way in reverse: paste a TRON address, then send PUMP to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.