Exchange Currencies Track Order Guides Telegram bot

Swap Sei EVM (SEI) to Uniswap (UNI) with no sign-up

Enter the SEI amount, paste your 0x address on Arbitrum One from your own wallet, then send SEI on Sei (EVM) to the one-time deposit address on your order page. Once the Sei (EVM) network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends UNI on Arbitrum One straight to your address.

Swap UNI to SEI instead

Rate
1 SEI ≈ 0.00708093 UNI
Network Fee
-
Deposit Fee
-

Enter an address on the Arbitrum One (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

SEI to UNI exchange rate

The SEI to UNI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several SEI amounts come to in UNI after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

SEI to UNI Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

SEI Sei
You get (estimate)
UNI Arbitrum ERC-20
21.2428043 UNI
Rate
1 SEI ≈ 0.00708093 UNI
Value in USD
≈ $103.04
Network Fee
0.0058345 UNI

SEI to UNI conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 SEI≈ 7.07704 UNI
5,000 SEI≈ 35.4086 UNI
10,000 SEI≈ 70.823 UNI
50,000 SEI≈ 354.138 UNI
100,000 SEI≈ 708.282 UNI
500,000 SEI≈ 3,541.44 UNI
1,000,000 SEI≈ 7,082.88 UNI

SEI to UNI daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.00782541 UNI
Lowest0.00724179 UNI
Change, 6 days−5.78%
0.00782541 0.00724179
Nov 16, 2026Nov 22, 2026
DateRate
1 SEI ≈ 0.00724179 UNI
1 SEI ≈ 0.00782541 UNI
1 SEI ≈ 0.00765198 UNI
1 SEI ≈ 0.00752069 UNI
1 SEI ≈ 0.00758688 UNI
1 SEI ≈ 0.00753595 UNI
1 SEI ≈ 0.00768631 UNI
Live Market Snapshot Updated Nov 22, 2026 18:15 UTC
1 SEI price
$0.0353
1 UNI price
$4.85
1 SEI buys
0.00708093 UNI

How to swap SEI to UNI

  1. Copy your UNI address

    Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the SEI amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The UNI estimate under it already has the payout fee taken out.

  3. Send SEI to the deposit address

    Press Exchange Now. Your order page shows a one-time Sei (EVM) deposit address: send the amount you entered in one transaction. Send SEI from a wallet that holds it on Sei (EVM) and also holds enough of the coin the network charges its fee in, usually its own coin.

  4. Follow the order until UNI arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the UNI is in your wallet.

What the SEI to UNI swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the Sei (EVM) network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the UNI you get per SEI drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

SEI to UNI at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Sei EVM (SEI) Uniswap (Arbitrum One) (UNI)
Network Sei (EVM) Arbitrum One
Type Native coin ERC-20 token
Contract - 0xFa7F89…f1F7f0
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.00126 SEI ≈ 0.005697 UNI
Route Cross-chain: Sei (EVM) to Arbitrum One
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 1.7460022 SEI
Account / ID Not needed to start a swap

How long the SEI to UNI swap takes

The SEI to UNI swap is three waits in a row: the Sei (EVM) network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. The time Sei (EVM) needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the SEI, and the order page moves from waiting to confirming once the deposit is found.

  2. Sei (EVM) confirms the deposit

    When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.

  3. Exchange and UNI payout

    The partner swaps the SEI and sends UNI. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Arbitrum One

    Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.

Your UNI address for the payout

Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
  • An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving UNI on Arbitrum One: address and memo

Memo or tagNot used on this network.
Block explorerarbiscan.io

More about swapping on Arbitrum One

Which network your UNI arrives on

This page pays UNI on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the UNI arrives

The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. Your wallet may list the UNI only after you add the token, and moving it later costs gas in ETH on Arbitrum One, so keep some ETH there.

If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.

If your SEI deposit is slow or stuck

Look up the transaction ID from your wallet in a block explorer for Sei (EVM). If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your SEI to UNI swap

Your deposit is recorded on Sei (EVM) for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send SEI only on Sei (EVM), the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
  • Copy your UNI address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

SEI to UNI Frequently Asked Questions

How do I swap SEI to UNI?

Enter the SEI amount and your UNI address in the form at the top, press Exchange Now, and send SEI on Sei (EVM) to the one-time deposit address on your order page. After the Sei (EVM) network confirms the deposit, the exchange partner sends UNI on Arbitrum One to your address. No account or email is needed.

How much UNI do I get for 1 SEI?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the SEI to UNI calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does SEI to UNI take?

There is no set time: the Sei (EVM) network confirms the deposit first, then the exchange partner swaps it and sends the UNI payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for SEI to UNI?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Sei EVM to Uniswap without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive UNI on another network?

Yes, through a different entry in the coin list, since this page pays UNI on Arbitrum One. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the UNI I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less SEI arrived than you entered.

How do I swap UNI back to SEI?

Use the UNI to SEI page, linked next to the swap form. It works the same way in reverse: paste a Sei (EVM) address, then send UNI to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps