Exchange Currencies Track Order Guides Telegram bot

Swap JUST (JST) to Ethereum (ETH) with no sign-up

Enter the JST amount, paste your 0x address on Arbitrum One from your own wallet, then send JST on TRON to the one-time deposit address on your order page. Once the TRON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ETH on Arbitrum One straight to your address.

Swap ETH to JST instead

Rate
1 JST ≈ 0.0000826417 ETH
Network Fee
-
Deposit Fee
-

Enter an address on the Arbitrum One network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

JST to ETH exchange rate

The JST to ETH rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several JST amounts come to in ETH after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

JST to ETH Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

JST TRON TRC-20
You get (estimate)
ETH Arbitrum
0.0578492 ETH
Rate
1 JST ≈ 0.0000826417 ETH
Value in USD
≈ $101.67
Network Fee
0.00006 ETH

JST to ETH conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000 JST≈ 0.0827782 ETH
5,000 JST≈ 0.415165 ETH
10,000 JST≈ 0.830649 ETH
50,000 JST≈ 4.15452 ETH
100,000 JST≈ 8.30936 ETH

JST to ETH daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.0000880552 ETH
Lowest0.0000780027 ETH
Change, 6 days+9.14%
0.0000880552 0.0000780027
Nov 16, 2026Nov 22, 2026
DateRate
1 JST ≈ 0.0000869252 ETH
1 JST ≈ 0.0000880552 ETH
1 JST ≈ 0.0000838329 ETH
1 JST ≈ 0.0000810395 ETH
1 JST ≈ 0.0000799179 ETH
1 JST ≈ 0.0000780027 ETH
1 JST ≈ 0.0000796441 ETH
Live Market Snapshot Updated Nov 22, 2026 19:47 UTC
1 JST price
$0.1493
1 ETH price
$1,757.54
1 JST buys
0.00008264 ETH

How to swap JST to ETH

  1. Copy your ETH address

    Open your wallet with Arbitrum One selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the JST amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ETH estimate under it already has the payout fee taken out.

  3. Send JST to the deposit address

    Press Exchange Now. Your order page shows a one-time TRON deposit address: send the amount you entered in one transaction. Send from a TRON wallet that holds TRX for the fee, because a TRON transfer burns TRX when your Bandwidth or Energy does not cover it.

  4. Follow the order until ETH arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ETH is in your wallet.

What the JST to ETH swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Arbitrum One network fee for your payout. You pay the TRON network fee from the sending address: the transfer uses Bandwidth from your staked or delegated TRX or the free allowance, and if neither covers the whole transfer, TRX is burned for all of it. A JST transfer runs the token's contract and needs Energy, which has no free allowance: without staked or delegated Energy, the network burns TRX for it, more when the receiver holds none of the token.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ETH you get per JST drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

JST to ETH at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset JUST (JST) Ethereum (Arbitrum) (ETH)
Network TRON Arbitrum One
Type TRC-20 token Native coin
Contract TCFLL5dx…mWZZy9 -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 3.097 JST ≈ 0.00006 ETH
Route Cross-chain: TRON to Arbitrum One
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 8.2822585 JST
Account / ID Not needed to start a swap

How long the JST to ETH swap takes

The JST to ETH swap is three waits in a row: the TRON network confirms your deposit, the exchange partner swaps it, and the Arbitrum One network delivers the payout. TRON schedules a block every 3 seconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the JST, and the order page moves from waiting to confirming once the deposit is found.

  2. TRON solidifies the deposit

    A block is final once at least 19 of TRON's 27 block producers have produced blocks at or above its height, typically about a minute later.

  3. Exchange and ETH payout

    The partner swaps the JST and sends ETH. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on Arbitrum One

    Your wallet lists it once an Arbitrum One block includes the transaction, as long as the wallet is set to Arbitrum One.

Your ETH address for the payout

Arbitrum One uses the Ethereum address format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or Arbitrum Nova: the payout is sent on Arbitrum One, a separate chain.
  • An address at a wallet or exchange that does not support Arbitrum One: Arbitrum's FAQ says its team cannot recover such funds; only that wallet or exchange might.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on Arbitrum One: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from Arbiscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving ETH on Arbitrum One: address and memo

Memo or tagNot used on this network.
Block explorerarbiscan.io

More about swapping on Arbitrum One

Which network your ETH arrives on

This page pays ETH on Arbitrum One. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the ETH arrives

The payout is an Arbitrum One transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Arbitrum One. The coins can be moved again once the transaction is in a block, and the transfer is final when its batch is final on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. Through the official Arbitrum bridge, a withdrawal takes at least seven days because of the challenge period, and you then claim it on Ethereum with a transaction that needs ETH on Ethereum for gas. ETH is the gas coin of Arbitrum One, so the payout itself pays the fee when you move it, or anything else on Arbitrum One, later.

If the address belongs to an exchange, check that it accepts this coin on Arbitrum One and what its minimum deposit is; for a token, it must support the same contract. Arbitrum tells exchanges to credit deposits only once they are final on Ethereum. To check the payout yourself, open the payout hash from the order page in an Arbitrum One explorer such as Arbiscan.

If your JST deposit is slow or stuck

Look up the transaction ID on Tronscan. If a token transfer shows as failed, for example with OUT_OF_ENERGY, no tokens moved, but the Energy it used is still charged and not refunded. A failed transaction stays failed, so add TRX or Energy, or raise the fee limit if your wallet allows it, and then send again.

If Tronscan cannot find the transaction ID, the network may have dropped it, since TRON drops a transaction that is not in a block by its expiration time. Send again only once your wallet reports it expired and your balance still holds the amount: until it expires, the first one could still land, and you would pay twice.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your JST to ETH swap

Your deposit is public on TRON: anyone can look up the sending and deposit addresses, the amount, and the TRX or resources the transfer used on Tronscan. The payout, its amount and your receiving address are public on Arbiscan, where anyone who knows the address can see its whole history on Arbitrum One. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep spare TRX in the sending address for the fee, because a token transfer that runs out of Energy fails and the TRX it burned is not refunded.
  • Copy your ETH address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

JST to ETH Frequently Asked Questions

How do I swap JST to ETH?

Enter the JST amount and your ETH address in the form at the top, press Exchange Now, and send JST on TRON to the one-time deposit address on your order page. After the TRON network confirms the deposit, the exchange partner sends ETH on Arbitrum One to your address. No account or email is needed.

How much ETH do I get for 1 JST?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the JST to ETH calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does JST to ETH take?

There is no set time: the TRON network confirms the deposit first, then the exchange partner swaps it and sends the ETH payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for JST to ETH?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap JUST to Ethereum without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive ETH on another network?

Yes, through a different entry in the coin list, since this page pays ETH on Arbitrum One. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the ETH I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less JST arrived than you entered.

How do I swap ETH back to JST?

Use the ETH to JST page, linked next to the swap form. It works the same way in reverse: paste a TRON address, then send ETH to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps