Swap Bitcoin (BTC) to Toncoin (TON) with no sign-up
Enter the BTC amount, paste a TON wallet address from your own wallet, then send BTC to the one-time deposit address on your order page. Once the Bitcoin network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The BTC to TON rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several BTC amounts come to in TON after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
BTC to TON Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
BTCBitcoin
You get (estimate)
TONTON
Rate
1 BTC ≈ 61,443.4 TON
Value in USD
≈ $59,186.88
Network Fee
0.0075 TON
BTC to TON conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 11, 2026 to Nov 22, 2026.
Highest62,960 TON
Lowest59,642.5 TON
Change, 11 days+2.16%
62,96059,642.5Nov 11, 2026Nov 22, 2026
Date
Rate
1 BTC ≈ 62,960 TON
1 BTC ≈ 60,981 TON
1 BTC ≈ 60,835.2 TON
1 BTC ≈ 61,294.8 TON
1 BTC ≈ 59,642.5 TON
1 BTC ≈ 61,682.4 TON
1 BTC ≈ 60,827.9 TON
Live Market SnapshotUpdated Nov 22, 2026 03:32 UTC
1 BTC price
$60,656.42
1 TON price
$0.9633
1 BTC buys
61443.4053973 TON
How to swap BTC to TON
1
Copy your TON address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the BTC amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The TON estimate under it already has the payout fee taken out.
3
Send BTC to the deposit address
Press Exchange Now. Your order page shows a one-time Bitcoin deposit address: send the amount you entered in one transaction. Send from any Bitcoin wallet, whatever its address type (1, 3 or bc1), at a normal fee rate.
4
Follow the order until TON arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the TON is in your wallet.
About Swapping Bitcoin to Toncoin
Bitcoin sent from any BTC wallet becomes Gram, the coin formerly called Toncoin, delivered on The Open Network to a wallet address you control. The pair still uses the TON ticker, and no account or email is involved. Telegram is the usual draw: wallet features inside the app use the coin, which makes a BTC to TON swap a practical way to pay or tip there from bitcoin savings.
The rename from Toncoin to Gram followed a community vote and took effect on June 15, 2026, while the network, balances and addresses stayed the same. Gram is the native proof-of-stake coin of TON, so moving from bitcoin is a cross-chain swap. TON addresses usually start with UQ or EQ. This coin supports a memo, which TON wallets call a comment: if your address belongs to an exchange that gave you one, enter it, or the deposit may not be credited.
The widget estimate uses a floating rate and already removes the exchange margin and the TON payout fee. A market move before your bitcoin confirms can make the Gram you receive differ slightly. Bitcoin aims for a block about every 10 minutes, and TON settles transfers quickly once the payout is sent, so the deposit side decides most of the wait. Follow progress on the order page and keep its transaction ID.
What the BTC to TON swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Bitcoin network fee yourself: your wallet sets it from the transaction's size and the fee rate you choose, not from the amount you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the TON you get per BTC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
BTC to TON at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Bitcoin (BTC)
Toncoin (TON)
Network
Bitcoin
TON
Type
Native coin
Native coin
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 22, 2026)
≈ 0.0000056 BTC
≈ 0.0075 TON
Route
Cross-chain: Bitcoin to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0000112 BTC
Account / ID
Not needed to start a swap
How long the BTC to TON swap takes
The BTC to TON swap is three waits in a row: the Bitcoin network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. Bitcoin blocks come about 10 minutes apart on average, and the exchange partner swaps only after your deposit has the confirmations it requires, because each block on top makes a payment harder to reverse. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the BTC, and the order page moves from waiting to confirming once the deposit is found.
2Bitcoin blocks confirm it
A deposit with a fee rate below what miners currently prioritize can wait much longer for its first confirmation.
3Exchange and TON payout
The partner swaps the BTC and sends TON. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the TON under your address once the transfer is in a block, and a masterchain block then makes it final.
Your TON address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. TON can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
Receiving TON on TON: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
This page pays TON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. TON sent to a wallet that has never sent anything stays in its address, and your wallet app deploys the wallet contract with your first outgoing transfer, usually paying for that from the balance.
If the address belongs to an exchange, check that the exchange gives it for TON deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for TON, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your BTC deposit is slow or stuck
Look up your transaction ID on a Bitcoin explorer such as mempool.space. If it is still unconfirmed, the fee rate is probably below what miners take now. Replace-by-fee can fix this in wallets that support it: the wallet sends a new version of the same payment with a higher fee, which replaces the stuck one. The other route, child pays for parent, spends the payment's change with a high fee, which makes miners more likely to take both together.
Keep the amount and the deposit address the same when you raise the fee. The replacement has a new transaction ID, so give that ID to support if you need help. Bitcoin Core nodes accept a replacement by default since version 28.0, even if the first version did not signal it.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your BTC to TON swap
Your deposit is public: the amount, your sending addresses and the one-time deposit address stay on the Bitcoin chain permanently, where anyone can look them up. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Enter the exchange's TON comment in the memo field exactly as issued, and leave the field blank for a self-custody wallet.
Match the TON address you paste, usually starting with UQ or EQ, against your wallet's receive screen character for character.
Do not enter an Ethereum or BNB Smart Chain address, since this page pays out native Gram on TON, not ERC-20 or BEP-20 Toncoin.
Attach a miner fee to the BTC deposit that suits current Bitcoin mempool traffic so the order starts without delay.
Choose a normal fee rate in your Bitcoin wallet, because a deposit priced below what miners take now can sit unconfirmed for a long time.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
BTC to TON Frequently Asked Questions
How do I swap BTC to TON?
Enter the BTC amount and your TON address in the form at the top, press Exchange Now, and send BTC to the one-time deposit address on your order page. After the Bitcoin network confirms the deposit, the exchange partner sends TON to your address. No account or email is needed.
How much TON do I get for 1 BTC?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the BTC to TON calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does BTC to TON take?
There is no set time: the Bitcoin network confirms the deposit first, then the exchange partner swaps it and sends the TON payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for BTC to TON?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Bitcoin to Toncoin without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap BTC to TON?
For the payout, only if your TON address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Can I receive TON on another network?
Yes, through a different entry in the coin list, since this page pays TON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the TON I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less BTC arrived than you entered.
How do I swap TON back to BTC?
Use the TON to BTC page, linked next to the swap form. It works the same way in reverse: paste a Bitcoin address, then send TON to the one-time deposit address.
Why does this page say TON if the coin is now Gram?
The exchange still lists the coin under the TON ticker as Gram (ex Ton/TonCoin), so the pair keeps the BTC to TON name. Gram and Toncoin are the same coin on The Open Network, renamed after a community vote, and the payout is native Gram.
Which TON address format should I paste?
Paste the address your wallet shows on its receive screen, usually 48 characters beginning with UQ or EQ. Both forms point to the same account, and UQ is the non-bounceable form most wallets now display. An Ethereum or BNB Smart Chain address will not work, since this payout goes out on TON.
Will my old Toncoin address still work for Gram?
Your existing TON address works as before, because the rename did not change addresses or balances. Copy it from your wallet as usual. Just make sure it is a native TON address and not an Ethereum or BNB Smart Chain address that held a wrapped Toncoin token.
Can I receive TON straight into my Telegram wallet?
You can, as long as the wallet shows you a TON receive address. If it also displays a memo or comment for deposits, enter that in the memo field. Without it, a custodial service may not be able to match the payment to your account.
What happens if I forget the memo for an exchange address?
The TON reaches the exchange's address but may not be credited to your account, because the exchange cannot tell who it belongs to. Contact that exchange's support and give them the payout details, which you can find by searching their deposit address on a TON block explorer. Recovery is up to them and is not certain, so add the memo before you create the order.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.