Exchange Currencies Track Order Guides Telegram bot

Swap Ethereum (ETH) to Pulsechain (PLS) with no sign-up

Enter the ETH amount, paste your PulseChain address from your own wallet, then send ETH on zkSync Era to the one-time deposit address on your order page. Once the zkSync Era network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends PLS on PulseChain straight to your address.

Swap PLS to ETH instead

Network Fee
-
Deposit Fee
-

Enter an address on the PulseChain network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

ETH to PLS exchange rate

The ETH to PLS rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.

ETH to PLS Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

ETH zkSync
You get (estimate)
PLS PulseChain
0
Rate
-
Network Fee
-
Live Market Snapshot Updated Nov 22, 2026 17:00 UTC
1 ETH price
$1,764.25

How to swap ETH to PLS

  1. Copy your PLS address

    Open your wallet's receive screen for PLS on PulseChain and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the ETH amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The PLS estimate under it already has the payout fee taken out.

  3. Send ETH to the deposit address

    Press Exchange Now. Your order page shows a one-time zkSync Era deposit address: send the amount you entered in one transaction. Send from a wallet switched to zkSync Era that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until PLS arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the PLS is in your wallet.

What the ETH to PLS swap costs

Two costs come out of the estimate before you see it: the exchange margin and the PulseChain network fee for your payout. You pay the zkSync Era network fee yourself in ETH on zkSync Era, for ETH and tokens alike, unless an app's paymaster covers it; the fee depends partly on Ethereum gas prices, and your wallet estimates it. When you send ETH, the fee comes out of the same ETH balance on zkSync Era, so the wallet needs the amount you entered plus the fee.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the PLS you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

ETH to PLS at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Ethereum (ZkSync Era) (ETH) Pulsechain (PLS) (PLS)
Network zkSync Era PulseChain
Type Native coin Native coin
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.00021 ETH -
Route Cross-chain: zkSync Era to PulseChain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0005128 ETH
Account / ID Not needed to start a swap

How long the ETH to PLS swap takes

The ETH to PLS swap is three waits in a row: the zkSync Era network confirms your deposit, the exchange partner swaps it, and the PulseChain network delivers the payout. zkSync Era makes a block about every second, and the sequencer confirms your deposit once one includes it. It is final only after its batch is proven and executed on Ethereum, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.

  2. A zkSync Era block includes it

    Its batch is then committed to Ethereum, proven, and executed after a security delay, which makes it final.

  3. Exchange and PLS payout

    The partner swaps the ETH and sends PLS. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on PulseChain

    Your wallet lists the PLS as received once PulseChain has confirmed the payout.

Your PLS address for the payout

A PulseChain receiving address is 0x followed by 40 hexadecimal characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for PLS on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving PLS on PulseChain: address and memo

Memo or tagNot used on this network.
Block explorerscan.pulsechain.com

Send ETH on the right network

On the sending side, send ETH only on zkSync Era, the network your order page names. ETH sent on another network does not reach the deposit address. ETH exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the PLS arrives

The payout is an ordinary PulseChain transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to PulseChain and, for a token, that it displays this token.

If the address belongs to an exchange, check that the exchange accepts PLS on PulseChain, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a PulseChain block explorer.

If your ETH deposit is slow or stuck

Look up the transaction hash on explorer.zksync.io. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, on other chains built with the ZK Stack and on other EVM networks, but the order waits for a transfer on zkSync Era only.

If the transfer is not on the explorer, check that the wallet held enough ETH on zkSync Era for the fee: unless a paymaster covers it, an ordinary account pays the fee in ETH, so a token send needs ETH beside the token. zkSync Era has no priority fee, so raising the tip does not move a transaction ahead.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your ETH to PLS swap

Your deposit is public: the amount, your sending address and the deposit address show on explorer.zksync.io, and the resulting state changes are published to Ethereum. The payout is recorded on PulseChain too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to zkSync Era and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your PLS address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

ETH to PLS Frequently Asked Questions

How do I swap ETH to PLS?

Enter the ETH amount and your PLS address in the form at the top, press Exchange Now, and send ETH on zkSync Era to the one-time deposit address on your order page. After the zkSync Era network confirms the deposit, the exchange partner sends PLS on PulseChain to your address. No account or email is needed.

How much PLS do I get for 1 ETH?

Type 1 into the ETH to PLS calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.

How long does ETH to PLS take?

There is no set time: the zkSync Era network confirms the deposit first, then the exchange partner swaps it and sends the PLS payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for ETH to PLS?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Ethereum to Pulsechain without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the PLS I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.

How do I swap PLS back to ETH?

Use the PLS to ETH page, linked next to the swap form. It works the same way in reverse: paste a zkSync Era address, then send PLS to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps