Swap Ethereum (ETH) to Brett (BRETT) with no sign-up
Enter the ETH amount, paste your 0x address on Base from your own wallet, then send ETH on zkSync Era to the one-time deposit address on your order page. Once the zkSync Era network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BRETT on Base straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The ETH to BRETT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several ETH amounts come to in BRETT after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
ETH to BRETT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHzkSync
You get (estimate)
BRETTBaseERC-20
Rate
1 ETH ≈ 486,768 BRETT
Value in USD
≈ $1,722.05
Network Fee
0.2688934 BRETT
ETH to BRETT conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest527,996 BRETT
Lowest422,797 BRETT
Change, 6 days−19.92%
527,996422,797Nov 16, 2026Nov 22, 2026
Date
Rate
1 ETH ≈ 422,797 BRETT
1 ETH ≈ 478,404 BRETT
1 ETH ≈ 488,518 BRETT
1 ETH ≈ 516,138 BRETT
1 ETH ≈ 515,039 BRETT
1 ETH ≈ 517,402 BRETT
1 ETH ≈ 527,996 BRETT
Live Market SnapshotUpdated Nov 22, 2026 21:11 UTC
1 ETH price
$1,763.15
1 BRETT price
$0.00353772
1 ETH buys
486767.8685552 BRETT
How to swap ETH to BRETT
1
Copy your BRETT address
Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BRETT estimate under it already has the payout fee taken out.
3
Send ETH to the deposit address
Press Exchange Now. Your order page shows a one-time zkSync Era deposit address: send the amount you entered in one transaction. Send from a wallet switched to zkSync Era that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until BRETT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BRETT is in your wallet.
What the ETH to BRETT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the zkSync Era network fee yourself in ETH on zkSync Era, for ETH and tokens alike, unless an app's paymaster covers it; the fee depends partly on Ethereum gas prices, and your wallet estimates it. When you send ETH, the fee comes out of the same ETH balance on zkSync Era, so the wallet needs the amount you entered plus the fee.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BRETT you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
ETH to BRETT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (ZkSync Era) (ETH)
Brett (Based) (BRETT)
Network
zkSync Era
Base
Type
Native coin
ERC-20 token
Contract
-
0x532f27…b142e4
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00021 ETH
≈ 0.2689 BRETT
Route
Cross-chain: zkSync Era to Base
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0004641 ETH
Account / ID
Not needed to start a swap
How long the ETH to BRETT swap takes
The ETH to BRETT swap is three waits in a row: the zkSync Era network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. zkSync Era makes a block about every second, and the sequencer confirms your deposit once one includes it. It is final only after its batch is proven and executed on Ethereum, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.
2A zkSync Era block includes it
Its batch is then committed to Ethereum, proven, and executed after a security delay, which makes it final.
3Exchange and BRETT payout
The partner swaps the ETH and sends BRETT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Base
Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.
Your BRETT address for the payout
Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
On the sending side, send ETH only on zkSync Era, the network your order page names. ETH sent on another network does not reach the deposit address. ETH exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the BRETT only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.
If your ETH deposit is slow or stuck
Look up the transaction hash on explorer.zksync.io. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, on other chains built with the ZK Stack and on other EVM networks, but the order waits for a transfer on zkSync Era only.
If the transfer is not on the explorer, check that the wallet held enough ETH on zkSync Era for the fee: unless a paymaster covers it, an ordinary account pays the fee in ETH, so a token send needs ETH beside the token. zkSync Era has no priority fee, so raising the tip does not move a transaction ahead.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH to BRETT swap
Your deposit is public: the amount, your sending address and the deposit address show on explorer.zksync.io, and the resulting state changes are published to Ethereum. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to zkSync Era and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your BRETT address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ETH to BRETT Frequently Asked Questions
How do I swap ETH to BRETT?
Enter the ETH amount and your BRETT address in the form at the top, press Exchange Now, and send ETH on zkSync Era to the one-time deposit address on your order page. After the zkSync Era network confirms the deposit, the exchange partner sends BRETT on Base to your address. No account or email is needed.
How much BRETT do I get for 1 ETH?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH to BRETT calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does ETH to BRETT take?
There is no set time: the zkSync Era network confirms the deposit first, then the exchange partner swaps it and sends the BRETT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH to BRETT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to Brett without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the BRETT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.
How do I swap BRETT back to ETH?
Use the BRETT to ETH page, linked next to the swap form. It works the same way in reverse: paste a zkSync Era address, then send BRETT to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.