Swap USD Coin (USDC) to Brett (BRETT) with no sign-up
Enter the USDC amount, paste your 0x address on Base from your own wallet, then send USDC on Sei (EVM) to the one-time deposit address on your order page. Once the Sei (EVM) network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BRETT on Base straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDC to BRETT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDC amounts come to in BRETT after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
USDC to BRETT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDCSeiERC-20
You get (estimate)
BRETTBaseERC-20
Rate
1 USDC ≈ 311.793 BRETT
Value in USD
≈ $109.37
Network Fee
0.2688934 BRETT
USDC to BRETT conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 17, 2026 to Nov 22, 2026.
Highest287.67 BRETT
Lowest244.907 BRETT
Change, 5 days−11.10%
Date
Rate
1 USDC ≈ 244.907 BRETT
1 USDC ≈ 287.67 BRETT
1 USDC ≈ 271.22 BRETT
1 USDC ≈ 279.486 BRETT
1 USDC ≈ 277.584 BRETT
1 USDC ≈ 275.472 BRETT
Live Market SnapshotUpdated Nov 22, 2026 23:20 UTC
1 USDC price
$1.00
1 BRETT price
$0.00350774
1 USDC buys
311.79299287 BRETT
How to swap USDC to BRETT
1
Copy your BRETT address
Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDC amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BRETT estimate under it already has the payout fee taken out.
3
Send USDC to the deposit address
Press Exchange Now. Your order page shows a one-time Sei (EVM) deposit address: send the amount you entered in one transaction. Send USDC from a wallet that holds it on Sei (EVM) and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until BRETT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BRETT is in your wallet.
What the USDC to BRETT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the Sei (EVM) network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send. For a token, that fee is usually not paid in the token itself, so keep enough of the fee coin in the same wallet next to the USDC.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BRETT you get per USDC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDC to BRETT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
USD Coin (Sei EVM) (USDC)
Brett (Based) (BRETT)
Network
Sei (EVM)
Base
Type
ERC-20 token
ERC-20 token
Contract
0xe15fC3…f42392
0x532f27…b142e4
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.000424 USDC
≈ 0.2689 BRETT
Route
Cross-chain: Sei (EVM) to Base
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.002776 USDC
Account / ID
Not needed to start a swap
How long the USDC to BRETT swap takes
The USDC to BRETT swap is three waits in a row: the Sei (EVM) network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. The time Sei (EVM) needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDC, and the order page moves from waiting to confirming once the deposit is found.
2Sei (EVM) confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and BRETT payout
The partner swaps the USDC and sends BRETT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Base
Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.
Your BRETT address for the payout
Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
On the sending side, send USDC only on Sei (EVM), the network your order page names. USDC sent on another network does not reach the deposit address. USDC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the BRETT only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.
If your USDC deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Sei (EVM). If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDC to BRETT swap
Your deposit is recorded on Sei (EVM) for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send USDC only on Sei (EVM), the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your BRETT address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDC to BRETT Frequently Asked Questions
How do I swap USDC to BRETT?
Enter the USDC amount and your BRETT address in the form at the top, press Exchange Now, and send USDC on Sei (EVM) to the one-time deposit address on your order page. After the Sei (EVM) network confirms the deposit, the exchange partner sends BRETT on Base to your address. No account or email is needed.
How much BRETT do I get for 1 USDC?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDC to BRETT calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDC to BRETT take?
There is no set time: the Sei (EVM) network confirms the deposit first, then the exchange partner swaps it and sends the BRETT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDC to BRETT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap USD Coin to Brett without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the BRETT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDC arrived than you entered.
How do I swap BRETT back to USDC?
Use the BRETT to USDC page, linked next to the swap form. It works the same way in reverse: paste a Sei (EVM) address, then send BRETT to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.