Swap USD Coin (USDC) to Hamster Kombat (HMSTR) with no sign-up
Enter the USDC amount, paste a TON wallet address from your own wallet, then send USDC on the Polkadot Asset Hub to the one-time deposit address on your order page. Once the Polkadot Asset Hub network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HMSTR on TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The USDC to HMSTR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several USDC amounts come to in HMSTR after fees. It is worked out from the page's latest quote and carries that quote's time.
USDC to HMSTR Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
USDCAsset Hub
You get (estimate)
HMSTRTONJetton
Rate
1 USDC ≈ 6,582.98 HMSTR
Value in USD
≈ $100.57
Network Fee
395.4402882 HMSTR
USDC to HMSTR conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 15:16 UTC
1 USDC price
$1.00
1 HMSTR price
$0.00015278
1 USDC buys
6582.983628 HMSTR
How to swap USDC to HMSTR
1
Copy your HMSTR address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters.
2
Enter the USDC amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HMSTR estimate under it already has the payout fee taken out.
3
Send USDC to the deposit address
Press Exchange Now. Your order page shows a one-time Polkadot Asset Hub deposit address: send the amount you entered in one transaction. Send USDC from a wallet that holds it on the Polkadot Asset Hub and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until HMSTR arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HMSTR is in your wallet.
What the USDC to HMSTR swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Polkadot Asset Hub network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send. For a token, that fee is usually not paid in the token itself, so keep enough of the fee coin in the same wallet next to the USDC.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HMSTR you get per USDC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
USDC to HMSTR at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
USD Coin (Assethub) (USDC)
Hamster Kombat (HMSTR)
Network
Polkadot Asset Hub
TON
Type
Token
Jetton token
Contract
1337
EQAJ8uWd…drPcUo
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.03 USDC
≈ 387.9 HMSTR
Route
Cross-chain: Polkadot Asset Hub to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.191637 USDC
Account / ID
Not needed to start a swap
How long the USDC to HMSTR swap takes
The USDC to HMSTR swap is three waits in a row: the Polkadot Asset Hub network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. The time Polkadot Asset Hub needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the USDC, and the order page moves from waiting to confirming once the deposit is found.
2Polkadot Asset Hub confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and HMSTR payout
The partner swaps the USDC and sends HMSTR. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the HMSTR under your address once the transfer is in a block, and a masterchain block then makes it final.
Your HMSTR address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
On the sending side, send USDC only on the Polkadot Asset Hub, the network your order page names. USDC sent on another network does not reach the deposit address. USDC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. Your HMSTR sits in a separate Jetton wallet contract linked to your address, which the incoming transfer opens if needed with Gram (TON) the sender attaches; moving it later takes Gram (TON) for fees, unless your wallet app offers gasless transfers.
If the address belongs to an exchange, check that the exchange gives it for HMSTR deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for HMSTR, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your USDC deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Polkadot Asset Hub. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your USDC to HMSTR swap
Your deposit is recorded on the Polkadot Asset Hub for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send USDC only on the Polkadot Asset Hub, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your HMSTR address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
USDC to HMSTR Frequently Asked Questions
How do I swap USDC to HMSTR?
Enter the USDC amount and your HMSTR address in the form at the top, press Exchange Now, and send USDC on the Polkadot Asset Hub to the one-time deposit address on your order page. After the Polkadot Asset Hub network confirms the deposit, the exchange partner sends HMSTR on TON to your address. No account or email is needed.
How much HMSTR do I get for 1 USDC?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the USDC to HMSTR calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does USDC to HMSTR take?
There is no set time: the Polkadot Asset Hub network confirms the deposit first, then the exchange partner swaps it and sends the HMSTR payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for USDC to HMSTR?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap USD Coin to Hamster Kombat without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the HMSTR I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less USDC arrived than you entered.
How do I swap HMSTR back to USDC?
Use the HMSTR to USDC page, linked next to the swap form. It works the same way in reverse: paste a Polkadot Asset Hub address, then send HMSTR to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.