Enter the TRX amount, paste a Stellar G address from your own wallet, then send TRX to the one-time deposit address on your order page. Once the TRON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XLM straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The TRX to XLM rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several TRX amounts come to in XLM after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
TRX to XLM Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
TRXTRON
You get (estimate)
XLMStellar
Rate
1 TRX ≈ 2.34921 XLM
Value in USD
≈ $91.79
Network Fee
0.02 XLM
TRX to XLM conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 11, 2026 to Nov 22, 2026.
Highest2.36908 XLM
Lowest2.09939 XLM
Change, 11 days+12.45%
2.369082.09939Nov 11, 2026Nov 22, 2026
Date
Rate
1 TRX ≈ 2.36067 XLM
1 TRX ≈ 2.36908 XLM
1 TRX ≈ 2.32938 XLM
1 TRX ≈ 2.25673 XLM
1 TRX ≈ 2.19402 XLM
1 TRX ≈ 2.21541 XLM
1 TRX ≈ 2.17353 XLM
Live Market SnapshotUpdated Nov 22, 2026 03:42 UTC
1 TRX price
$0.3125
1 XLM price
$0.1302
1 TRX buys
2.34920663 XLM
How to swap TRX to XLM
1
Copy your XLM address
Open your Stellar wallet's receive screen and copy the account address that starts with G, from an account that already holds XLM. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the TRX amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XLM estimate under it already has the payout fee taken out.
3
Send TRX to the deposit address
Press Exchange Now. Your order page shows a one-time TRON deposit address: send the amount you entered in one transaction. Send from a TRON wallet that holds TRX for the fee, because a TRON transfer burns TRX when your Bandwidth or Energy does not cover it.
4
Follow the order until XLM arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XLM is in your wallet.
About Swapping TRON to Stellar
Send TRX on TRON and receive Stellar Lumens (XLM) at a Stellar address you control, without making an account. Enter your G address and, when the destination asks for it, a memo, then make the TRX transfer to the deposit address created for this order. People make this swap to fund a Stellar wallet for low-cost cross-border payments, or to hold the coin that pays fees and account reserves on the Stellar network.
XLM is the native asset of Stellar, a payment network that reaches agreement through the Stellar Consensus Protocol rather than mining, with ledgers closing every few seconds. TRX lives on TRON, so this is a cross-chain swap with different address formats: Stellar public keys are 56 characters long and start with G. Stellar also requires each account to hold a minimum XLM balance, set by the base reserve, before it exists on the ledger.
The XLM figure in the widget is a floating estimate, with the Stellar network fee for your payout already taken out. It can change slightly if TRX or XLM prices move before your TRON deposit confirms. Both networks are quick, so the exchange step is usually the longest part when you convert TRX to XLM. Track progress and the transaction ID on your order page, and check the payout on any Stellar block explorer.
What the TRX to XLM swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Stellar network fee for your payout. You pay the TRON network fee from the sending address: the transfer uses Bandwidth from your staked or delegated TRX or the free allowance, and if neither covers the whole transfer, TRX is burned for all of it. If the deposit address has never been used, your TRX transfer also activates it, and TRON charges the sender an account creation fee for that on top of the usual cost.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XLM you get per TRX drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
TRX to XLM at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
TRON (TRX)
Stellar (XLM)
Network
TRON
Stellar
Type
Native coin
Native coin
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 22, 2026)
≈ 0.1 TRX
≈ 0.02 XLM
Route
Cross-chain: TRON to Stellar
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.686317 TRX
Account / ID
Not needed to start a swap
How long the TRX to XLM swap takes
The TRX to XLM swap is three waits in a row: the TRON network confirms your deposit, the exchange partner swaps it, and the Stellar network delivers the payout. TRON schedules a block every 3 seconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the TRX, and the order page moves from waiting to confirming once the deposit is found.
2TRON solidifies the deposit
A block is final once at least 19 of TRON's 27 block producers have produced blocks at or above its height, typically about a minute later.
3Exchange and XLM payout
The partner swaps the TRX and sends XLM. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout in a closed ledger
Your wallet shows the XLM once the ledger with the payout closes, usually a few seconds after it is sent, and the payment is final from then on.
Your XLM address for the payout
A Stellar account address starts with G and is 56 characters of capital letters and the digits 2 to 7. The swap form rejected a muxed address (starts with M, 69 characters) and a contract address (starts with C), so paste the G address and enter any memo separately.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. XLM can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
Leaving out the memo of an exchange account: exchanges keep many customers in one Stellar account, and a payment without its memo can be lost or need manual tracing.
A new G address that holds no XLM yet: it is not an account until someone funds it, and a plain payment to it fails.
Receiving XLM on Stellar: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
On the sending side, send TRX only on TRON, the network your order page names. TRX sent on another network does not reach the deposit address. TRX exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Stellar payment, and it is final once the ledger that includes it closes, usually a few seconds after it is sent. Every Stellar account must keep a minimum balance in XLM, two base reserves plus more for each trustline or other entry it holds, and that part of the balance cannot be spent. Validators can vote to change the base reserve. Each later transaction also costs a small fee in XLM.
If the address belongs to an exchange, copy its G address and memo exactly as its Stellar deposit page shows them, and check its minimum deposit; exchanges that pool deposits in one account credit you by the memo. To check the payout yourself, open the payout hash from the order page in a Stellar explorer such as stellar.expert.
If your TRX deposit is slow or stuck
Look up the transaction ID on Tronscan. If a token transfer shows as failed, for example with OUT_OF_ENERGY, no tokens moved, but the Energy it used is still charged and not refunded. A failed transaction stays failed, so add TRX or Energy, or raise the fee limit if your wallet allows it, and then send again.
If Tronscan cannot find the transaction ID, the network may have dropped it, since TRON drops a transaction that is not in a block by its expiration time. Send again only once your wallet reports it expired and your balance still holds the amount: until it expires, the first one could still land, and you would pay twice.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your TRX to XLM swap
Your deposit is public on TRON: anyone can look up the sending and deposit addresses, the amount, and the TRX or resources the transfer used on Tronscan. The payout, its amount, your G address and any memo are visible to anyone on a Stellar explorer such as stellar.expert, and they stay in the ledger's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Add the memo your exchange shows, character for character, if the XLM goes to an exchange account, or the deposit may not be credited.
Use a Stellar public key that starts with G as the payout address, never a secret key starting with S.
Make sure a brand-new Stellar wallet receives enough XLM to cover the minimum balance so the account activates.
Route the TRX deposit through the TRON network rather than as the BEP-20 TRX token, because the deposit address only takes TRON.
Keep spare TRX in the sending address for the fee, because a token transfer that runs out of Energy fails and the TRX it burned is not refunded.
Copy your XLM address from the wallet's receive screen and compare its start and end after pasting.
TRX to XLM Frequently Asked Questions
How do I swap TRX to XLM?
Enter the TRX amount and your XLM address in the form at the top, press Exchange Now, and send TRX to the one-time deposit address on your order page. After the TRON network confirms the deposit, the exchange partner sends XLM to your address. No account or email is needed.
How much XLM do I get for 1 TRX?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the TRX to XLM calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does TRX to XLM take?
There is no set time: the TRON network confirms the deposit first, then the exchange partner swaps it and sends the XLM payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for TRX to XLM?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap TRON to Stellar without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap TRX to XLM?
For the payout, only if your XLM address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Why is the XLM I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less TRX arrived than you entered.
How do I swap XLM back to TRX?
Use the XLM to TRX page, linked next to the swap form. It works the same way in reverse: paste a TRON address, then send XLM to the one-time deposit address.
What does a Stellar address look like?
A Stellar public address is a 56-character string that begins with the letter G. Never paste a key starting with S, which is a secret key and should stay private. xswap.to never asks for secret keys or seed phrases.
Will a new Stellar wallet work for this payout?
It can, but Stellar accounts only exist once they hold the minimum balance set by the base reserve. The first payment to a new address has to cover that amount, so compare the payout estimate with it. An account that already exists has no such floor for incoming payments.
How come I received a little less XLM than quoted?
Quotes on xswap.to float with the market, so a price change before your TRX confirms alters the final amount slightly. The Stellar network fee for sending your payout was already deducted in the quote. A move in your favor gives you slightly more instead.
What protects my funds during a TRX to XLM swap?
Your deposit goes to an address created only for this order, and the payout goes straight to the Stellar address you entered. xswap.to holds no account balances and will never request your secret key or seed phrase. Your part is checking the address, adding the memo when needed, and sending TRX on TRON.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.