Exchange Currencies Track Order Guides Telegram bot

Swap Litecoin (LTC) to Monero (XMR) with no sign-up

Enter the LTC amount, paste a Monero address from your own wallet, then send LTC to the one-time deposit address on your order page. Once the Litecoin network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XMR straight to your address.

Swap XMR to LTC instead

Rate
1 LTC ≈ 0.0748211 XMR
Network Fee
-
Deposit Fee
-

Enter an address on the Monero network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LTC to XMR exchange rate

The LTC to XMR rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LTC amounts come to in XMR after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

LTC to XMR Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LTC Litecoin
You get (estimate)
XMR Monero
0.1496422 XMR
Rate
1 LTC ≈ 0.0748211 XMR
Value in USD
≈ $74.67
Network Fee
0.009 XMR

LTC to XMR conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 LTC≈ 0.784306 XMR
50 LTC≈ 3.95763 XMR
100 LTC≈ 7.92428 XMR
500 LTC≈ 39.6575 XMR
1,000 LTC≈ 79.324 XMR

LTC to XMR daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 11, 2026 to Nov 22, 2026.

Highest0.0902337 XMR
Lowest0.0804438 XMR
Change, 11 days−8.26%
0.0902337 0.0804438
Nov 11, 2026Nov 22, 2026
DateRate
1 LTC ≈ 0.0804438 XMR
1 LTC ≈ 0.0890181 XMR
1 LTC ≈ 0.0840258 XMR
1 LTC ≈ 0.0875843 XMR
1 LTC ≈ 0.0878552 XMR
1 LTC ≈ 0.0901292 XMR
1 LTC ≈ 0.0902337 XMR
Live Market Snapshot Updated Nov 22, 2026 03:48 UTC
1 LTC price
$40.28
1 XMR price
$499.01
1 LTC buys
0.0748211 XMR

How to swap LTC to XMR

  1. Copy your XMR address

    Open your Monero wallet's Receive screen and copy a subaddress, which starts with 8; the primary address, starting with 4, works too, and both are 95 characters long. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LTC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XMR estimate under it already has the payout fee taken out.

  3. Send LTC to the deposit address

    Press Exchange Now. Your order page shows a one-time Litecoin deposit address: send the amount you entered in one transaction. Send from your Litecoin wallet's regular balance, not from an MWEB balance, at the fee the wallet suggests; an MWEB payment reaches the main chain only inside a mined block.

  4. Follow the order until XMR arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XMR is in your wallet.

About Swapping Litecoin to Monero

This pair takes Litecoin (LTC) on its own chain and pays Monero (XMR) to your own Monero wallet address, with no account behind the order. The usual motive is privacy for future spending: an LTC balance has a public history anyone can follow, while XMR held in your own wallet does not reveal balances or counterparties on its chain. Paying for services that accept Monero is another common reason to convert LTC to XMR.

Monero hides senders with ring signatures, receivers with stealth addresses and amounts with RingCT, and its blocks are targeted at about two minutes. Litecoin offers an optional privacy layer called MWEB, but ordinary transfers from L, M or ltc1 addresses are fully visible. So your deposit to the order address stays public on the Litecoin chain, and only the XMR side is private. Payout addresses start with 4 or 8, and no payment ID is required.

The estimate in the widget uses a floating rate and already accounts for the Monero network fee on the payout. Should LTC move before your deposit confirms, the XMR amount will shift slightly. Litecoin confirmations set most of the pace, and afterward your Monero wallet has to scan new blocks to find the payment. Keep the order page open for live status and copy its transaction ID, even though Monero explorers hide amounts and recipients.

What the LTC to XMR swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Monero network fee for your payout. You pay the Litecoin network fee yourself, in LTC: your wallet sets it from the transaction's size and a fee rate per kilobyte, not from the amount you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XMR you get per LTC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LTC to XMR at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Litecoin (LTC) Monero (XMR)
Network Litecoin Monero
Type Native coin Native coin
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.0003 LTC ≈ 0.009 XMR
Route Cross-chain: Litecoin to Monero
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.2444421 LTC
Account / ID Not needed to start a swap

How long the LTC to XMR swap takes

The LTC to XMR swap is three waits in a row: the Litecoin network confirms your deposit, the exchange partner swaps it, and the Monero network delivers the payout. Litecoin targets a block every 2.5 minutes, and the exchange partner swaps only after your deposit has the confirmations it requires, because each block on top makes the payment harder to reverse. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LTC, and the order page moves from waiting to confirming once the deposit is found.

  2. Litecoin blocks confirm it

    A deposit with a fee rate below what miners take now can wait much longer for its first confirmation, and Litecoin Core nodes refuse replacements by default.

  3. Exchange and XMR payout

    The partner swaps the LTC and sends XMR. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. The 10-block lock ends

    Once the payout is in a block, a synced wallet lists it as locked. After 10 blocks, about 20 minutes on average, the XMR counts as spendable balance.

Your XMR address for the payout

A Monero standard address is 95 characters and starts with 4. A subaddress is also 95 characters and starts with 8. An integrated address is 106 characters, starts with 4 and has a payment ID built in. The swap form accepted all three types in our checks.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • Using an exchange address that needs a separate payment ID, which this form cannot pass on.
  • Paying out to a new Monero wallet before writing down its seed phrase: without it, the XMR cannot be restored if the device or wallet file is lost.

Receiving XMR on Monero: address and memo

Memo or tagNot used on this network.
Block explorerxmrchain.net

Send LTC on the right network

On the sending side, send LTC only on Litecoin, the network your order page names. LTC sent on another network does not reach the deposit address. LTC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the XMR arrives

Monero locks every received output for 10 blocks after the transaction is mined, about 20 minutes on average, and your wallet shows the amount as locked until then. It is a consensus rule of the network, not a hold by the swap, and it applies again to your change whenever you send XMR later.

A wallet that scans the chain on your device finds the payout once it is open and has synced past the payout block. If you restored the wallet from its seed, its restore height must be below the payout block, or the wallet skips the transaction. A block explorer cannot show your balance, because the payout goes to a one-time stealth address and the amount is hidden.

Use an exchange address only if that exchange still accepts XMR deposits in your region and gives you one complete address; if it asks for a separate payment ID next to a normal address, use your own wallet instead. To check the payout yourself, open the payout hash from the order page in a Monero explorer such as xmrchain.net.

If your LTC deposit is slow or stuck

Look up your transaction ID on a Litecoin explorer such as litecoinspace.org. If it is still unconfirmed, its fee rate is probably below what miners take now. A replace-by-fee bump may go nowhere: Litecoin Core turns transaction replacement off by default, so nodes on default settings refuse the new version. Child pays for parent can still help, because Litecoin Core's mining code ranks a transaction together with its unconfirmed parents: spending the payment's unconfirmed change with a higher fee makes miners more likely to take both.

If you sent from an MWEB balance, nothing appears on the main chain until a block is mined: the miner pays the coins out as an output of that block's HogEx transaction, which never waits in the mempool. Look the deposit up on the explorer by the deposit address, because its output sits in that HogEx transaction.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LTC to XMR swap

Your deposit is public: the amount and the deposit address stay on the Litecoin chain for anyone to look up, and so do your sending addresses when you pay from a regular balance. On Monero, outside observers cannot read the payout amount or your receiving address; the chain still shows that a transaction exists, with its block and fee. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Paste a standard Monero address starting with 4 or a subaddress starting with 8, then compare its first and last characters with your wallet.
  • Treat your LTC deposit as public information, because only the Monero payout is shielded on its chain.
  • Let your Monero wallet sync fully before you decide the XMR has not arrived, since it scans the chain for your outputs.
  • Check that an exchange still accepts XMR deposits before pasting its address, since several large platforms have delisted Monero.
  • Accept the fee your Litecoin wallet suggests, because Litecoin Core nodes refuse fee-bumping replacements by default and a low-fee deposit can wait a long time.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.

LTC to XMR Frequently Asked Questions

How do I swap LTC to XMR?

Enter the LTC amount and your XMR address in the form at the top, press Exchange Now, and send LTC to the one-time deposit address on your order page. After the Litecoin network confirms the deposit, the exchange partner sends XMR to your address. No account or email is needed.

How much XMR do I get for 1 LTC?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LTC to XMR calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LTC to XMR take?

There is no set time: the Litecoin network confirms the deposit first, then the exchange partner swaps it and sends the XMR payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LTC to XMR?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Litecoin to Monero without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the XMR I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LTC arrived than you entered.

How do I swap XMR back to LTC?

Use the XMR to LTC page, linked next to the swap form. It works the same way in reverse: paste a Litecoin address, then send XMR to the one-time deposit address.

Is the whole LTC to XMR swap private?

Only the Monero side is private. Your LTC deposit moves from your Litecoin address to the one-time deposit address on a public chain, where anyone can see it. The XMR payout lands in your Monero wallet, where ring signatures, stealth addresses and RingCT hide the sender, receiver and amount.

What does a valid Monero address look like?

A standard Monero address starts with 4 and is 95 characters long, and subaddresses start with 8. Integrated addresses, which embed a payment ID for exchanges, also start with 4 but are longer. Copy and paste rather than typing, and compare the first and last few characters against your wallet.

Why can't I spend the XMR right after it arrives?

Monero locks newly received outputs for 10 blocks, roughly 20 minutes at its two-minute block target, before they become spendable. Your wallet may show the balance as locked or pending during that time. This is normal network behavior and not a problem with the swap.

Can I check a Monero payout on a block explorer?

You can confirm that the payout transaction exists and was mined by searching its transaction ID on a Monero explorer. Amounts and recipient addresses stay hidden, so the explorer will not show your balance. Your own wallet is the proof of receipt, and support at @xswap_to on Telegram can help if the order says finished but the wallet shows nothing.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps