Swap Litecoin (LTC) to Toshi (TOSHI) with no sign-up
Enter the LTC amount, paste your 0x address on Base from your own wallet, then send LTC to the one-time deposit address on your order page. Once the Litecoin network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends TOSHI on Base straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The LTC to TOSHI rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
LTC to TOSHI Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
LTCLitecoin
You get (estimate)
TOSHIBaseERC-20
Rate
-
Value in USD
-
Network Fee
-
LTC to TOSHI daily rate
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest579,231 TOSHI
Lowest511,945 TOSHI
Change, 6 days−11.62%
579,231511,945Nov 16, 2026Nov 22, 2026
Date
Rate
1 LTC ≈ 511,945 TOSHI
1 LTC ≈ 523,501 TOSHI
1 LTC ≈ 542,218 TOSHI
1 LTC ≈ 567,339 TOSHI
1 LTC ≈ 575,134 TOSHI
1 LTC ≈ 575,179 TOSHI
1 LTC ≈ 579,231 TOSHI
Live Market SnapshotUpdated Nov 22, 2026 05:08 UTC
1 LTC price
$40.27
1 TOSHI price
$0.0000796
LTC to TOSHI market price range
Over the last 30 days, 1 LTC was worth between 466,828 and 601,061 TOSHI at market prices.
Oct 8, 2026Low 466,828 · High 601,061 TOSHINov 6, 2026
Market price of 1 LTC in TOSHI over the last 30 days
Based on daily market prices, checked on Nov 7, 2026. This is not your swap rate: the estimate in the swap form includes fees and moves with the market.
How to swap LTC to TOSHI
1
Copy your TOSHI address
Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the LTC amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The TOSHI estimate under it already has the payout fee taken out.
3
Send LTC to the deposit address
Press Exchange Now. Your order page shows a one-time Litecoin deposit address: send the amount you entered in one transaction. Send from your Litecoin wallet's regular balance, not from an MWEB balance, at the fee the wallet suggests; an MWEB payment reaches the main chain only inside a mined block.
4
Follow the order until TOSHI arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the TOSHI is in your wallet.
What the LTC to TOSHI swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the Litecoin network fee yourself, in LTC: your wallet sets it from the transaction's size and a fee rate per kilobyte, not from the amount you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the TOSHI you get per LTC drops near the minimum.
LTC to TOSHI at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Litecoin (LTC)
TOSHI
Network
Litecoin
Base
Type
Native coin
ERC-20 token
Contract
-
0xAC1Bd2…31B2B4
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.0003 LTC
-
Route
Cross-chain: Litecoin to Base
Rate
Floating, estimate shown before you send
Account / ID
Not needed to start a swap
How long the LTC to TOSHI swap takes
The LTC to TOSHI swap is three waits in a row: the Litecoin network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. Litecoin targets a block every 2.5 minutes, and the exchange partner swaps only after your deposit has the confirmations it requires, because each block on top makes the payment harder to reverse. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the LTC, and the order page moves from waiting to confirming once the deposit is found.
2Litecoin blocks confirm it
A deposit with a fee rate below what miners take now can wait much longer for its first confirmation, and Litecoin Core nodes refuse replacements by default.
3Exchange and TOSHI payout
The partner swaps the LTC and sends TOSHI. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Base
Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.
Your TOSHI address for the payout
Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
On the sending side, send LTC only on Litecoin, the network your order page names. LTC sent on another network does not reach the deposit address. LTC exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the TOSHI only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.
If your LTC deposit is slow or stuck
Look up your transaction ID on a Litecoin explorer such as litecoinspace.org. If it is still unconfirmed, its fee rate is probably below what miners take now. A replace-by-fee bump may go nowhere: Litecoin Core turns transaction replacement off by default, so nodes on default settings refuse the new version. Child pays for parent can still help, because Litecoin Core's mining code ranks a transaction together with its unconfirmed parents: spending the payment's unconfirmed change with a higher fee makes miners more likely to take both.
If you sent from an MWEB balance, nothing appears on the main chain until a block is mined: the miner pays the coins out as an output of that block's HogEx transaction, which never waits in the mempool. Look the deposit up on the explorer by the deposit address, because its output sits in that HogEx transaction.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your LTC to TOSHI swap
Your deposit is public: the amount and the deposit address stay on the Litecoin chain for anyone to look up, and so do your sending addresses when you pay from a regular balance. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Accept the fee your Litecoin wallet suggests, because Litecoin Core nodes refuse fee-bumping replacements by default and a low-fee deposit can wait a long time.
Copy your TOSHI address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
LTC to TOSHI Frequently Asked Questions
How do I swap LTC to TOSHI?
Enter the LTC amount and your TOSHI address in the form at the top, press Exchange Now, and send LTC to the one-time deposit address on your order page. After the Litecoin network confirms the deposit, the exchange partner sends TOSHI on Base to your address. No account or email is needed.
How much TOSHI do I get for 1 LTC?
Type 1 into the LTC to TOSHI calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does LTC to TOSHI take?
There is no set time: the Litecoin network confirms the deposit first, then the exchange partner swaps it and sends the TOSHI payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for LTC to TOSHI?
Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Litecoin to Toshi without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the TOSHI I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LTC arrived than you entered.
How do I swap TOSHI back to LTC?
Use the TOSHI to LTC page, linked next to the swap form. It works the same way in reverse: paste a Litecoin address, then send TOSHI to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees.