Exchange Currencies Track Order Guides Telegram bot

Swap Litecoin (LTC) to Polkadot (DOT) with no sign-up

Enter the LTC amount, paste a BNB Smart Chain address from your own wallet, then send LTC to the one-time deposit address on your order page. Once the Litecoin network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends DOT on BNB Smart Chain straight to your address.

Swap DOT to LTC instead

Rate
1 LTC ≈ 58.6289 DOT
Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LTC to DOT exchange rate

The LTC to DOT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LTC amounts come to in DOT after fees. It is worked out from the page's latest quote and carries that quote's time.

LTC to DOT Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LTC Litecoin
You get (estimate)
DOT BNB Chain BEP-20
117.2578449 DOT
Rate
1 LTC ≈ 58.6289 DOT
Value in USD
≈ $55.13
Network Fee
0.0047658 DOT

LTC to DOT conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1 LTC≈ 58.6177 DOT
5 LTC≈ 293.178 DOT
10 LTC≈ 586.379 DOT
50 LTC≈ 2,931.98 DOT
100 LTC≈ 5,863.99 DOT
500 LTC≈ 29,320 DOT
1,000 LTC≈ 58,640.1 DOT
Live Market Snapshot Updated Nov 22, 2026 20:52 UTC
1 LTC price
$40.97
1 DOT price
$0.4701
1 LTC buys
58.62892245 DOT

How to swap LTC to DOT

  1. Copy your DOT address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LTC amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The DOT estimate under it already has the payout fee taken out.

  3. Send LTC to the deposit address

    Press Exchange Now. Your order page shows a one-time Litecoin deposit address: send the amount you entered in one transaction. Send from your Litecoin wallet's regular balance, not from an MWEB balance, at the fee the wallet suggests; an MWEB payment reaches the main chain only inside a mined block.

  4. Follow the order until DOT arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the DOT is in your wallet.

About Swapping Litecoin to Polkadot (Binance Smart Chain)

Here you send native Litecoin (LTC) from its own chain and receive native DOT on Polkadot Asset Hub, paid to a Polkadot wallet address, with no account to open. That network detail matters: Asset Hub is the Polkadot system chain that holds DOT balances, so the payout needs a Polkadot address. It suits someone who wants DOT in their own wallet without an exchange account.

On the sending side, Litecoin is a Scrypt proof-of-work coin with blocks roughly every 2.5 minutes. The DOT you receive is native DOT on Polkadot Asset Hub, listed in the selector as Polkadot AssetHub. To swap LTC to DOT here, give a Polkadot address that starts with 1, never a 0x address. No memo is needed, and moving the coins later costs a small fee in DOT.

The widget estimate uses a floating rate and already subtracts the exchange margin plus the Asset Hub fee for sending your DOT. If prices move before the Litecoin deposit confirms, the amount can differ a little from that estimate. Litecoin confirmations and the exchange step set most of the pace in this LTC to DOT exchange. Track progress on the order page and check the payout with its transaction ID.

What the LTC to DOT swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the Litecoin network fee yourself, in LTC: your wallet sets it from the transaction's size and a fee rate per kilobyte, not from the amount you send.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the DOT you get per LTC drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LTC to DOT at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Litecoin (LTC) Polkadot (Binance Smart Chain) (DOT)
Network Litecoin BNB Smart Chain
Type Native coin BEP-20 token
Contract - 0x708360…873402
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.0003 LTC ≈ 0.004764 DOT
Route Cross-chain: Litecoin to BNB Smart Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0008322 LTC
Account / ID Not needed to start a swap

How long the LTC to DOT swap takes

The LTC to DOT swap is three waits in a row: the Litecoin network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. Litecoin targets a block every 2.5 minutes, and the exchange partner swaps only after your deposit has the confirmations it requires, because each block on top makes the payment harder to reverse. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LTC, and the order page moves from waiting to confirming once the deposit is found.

  2. Litecoin blocks confirm it

    A deposit with a fee rate below what miners take now can wait much longer for its first confirmation, and Litecoin Core nodes refuse replacements by default.

  3. Exchange and DOT payout

    The partner swaps the LTC and sends DOT. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your DOT address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for DOT on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving DOT on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Which network your DOT arrives on

This page pays DOT on BNB Smart Chain. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send LTC only on Litecoin, the network your order page names. LTC sent on another network does not reach the deposit address.

After the DOT arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the DOT later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this DOT stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits DOT on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your LTC deposit is slow or stuck

Look up your transaction ID on a Litecoin explorer such as litecoinspace.org. If it is still unconfirmed, its fee rate is probably below what miners take now. A replace-by-fee bump may go nowhere: Litecoin Core turns transaction replacement off by default, so nodes on default settings refuse the new version. Child pays for parent can still help, because Litecoin Core's mining code ranks a transaction together with its unconfirmed parents: spending the payment's unconfirmed change with a higher fee makes miners more likely to take both.

If you sent from an MWEB balance, nothing appears on the main chain until a block is mined: the miner pays the coins out as an output of that block's HogEx transaction, which never waits in the mempool. Look the deposit up on the explorer by the deposit address, because its output sits in that HogEx transaction.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LTC to DOT swap

Your deposit is public: the amount and the deposit address stay on the Litecoin chain for anyone to look up, and so do your sending addresses when you pay from a regular balance. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Paste a Polkadot address that starts with 1 for the DOT payout, never a 0x address.
  • Expect a small DOT fee when you later move or sell the coins, since Asset Hub fees are normally paid in DOT.
  • Open the Asset Hub network in your Polkadot wallet if the DOT balance does not appear after the payout.
  • If your wallet shows an address starting with 5, pick the Polkadot or Asset Hub network and copy the address shown there.
  • Accept the fee your Litecoin wallet suggests, because Litecoin Core nodes refuse fee-bumping replacements by default and a low-fee deposit can wait a long time.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.

LTC to DOT Frequently Asked Questions

How do I swap LTC to DOT?

Enter the LTC amount and your DOT address in the form at the top, press Exchange Now, and send LTC to the one-time deposit address on your order page. After the Litecoin network confirms the deposit, the exchange partner sends DOT on BNB Smart Chain to your address. No account or email is needed.

How much DOT do I get for 1 LTC?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LTC to DOT calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LTC to DOT take?

There is no set time: the Litecoin network confirms the deposit first, then the exchange partner swaps it and sends the DOT payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LTC to DOT?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Litecoin to Polkadot without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive DOT on another network?

Yes, through a different entry in the coin list, since this page pays DOT on BNB Smart Chain. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the DOT I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LTC arrived than you entered.

How do I swap DOT back to LTC?

Use the DOT to LTC page, linked next to the swap form. It works the same way in reverse: paste a Litecoin address, then send DOT to the one-time deposit address.

Is this native Polkadot DOT or a token?

It is native DOT on Polkadot Asset Hub, the coin list's Polkadot AssetHub entry, not a token on BNB Smart Chain. Since the Asset Hub migration of November 2025, DOT balances that sat on the relay chain live on Asset Hub under the same addresses. The payout lands at your Polkadot address.

Can I use my Polkadot wallet address to receive DOT here?

Yes, a Polkadot address that starts with 1 is the format this payout needs, since it goes out on Polkadot Asset Hub. The form rejects the generic form starting with 5, the Kusama form and 0x addresses.

Do I need DOT in my wallet to receive the payout?

No, because the payout fee is already deducted from the DOT estimate. You will need a little DOT later to send, swap or sell the coins, since fees on Asset Hub are normally paid in DOT.

Why can't I see my DOT after the swap finished?

Most often the wallet is showing a network other than Asset Hub. Open the Asset Hub view of your Polkadot wallet, where DOT balances now live. The payout transaction ID on an Asset Hub explorer such as Subscan shows where the coins went.

What if I sent the wrong coin to the deposit address?

Blockchain transfers cannot be reversed, and the deposit address only accepts LTC on the Litecoin network. Contact support on Telegram at @xswap_to with the transaction ID and explain what was sent. Recovery is not always possible, and refunds are never automatic.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps