Exchange Currencies Track Order Guides Telegram bot

Swap Chainlink (LINK) to Starknet (STRK) with no sign-up

Enter the LINK amount, paste your Starknet address from your own wallet, then send LINK on Polygon PoS to the one-time deposit address on your order page. Once the Polygon PoS network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends STRK on Starknet straight to your address.

Swap STRK to LINK instead

Rate
1 LINK ≈ 274.9736 STRK
Network Fee
-
Deposit Fee
-

Enter an address on the Starknet network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LINK to STRK exchange rate

The LINK to STRK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in STRK after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

LINK to STRK Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LINK Polygon ERC-20
You get (estimate)
STRK Starknet
2,749.7355578 STRK
Rate
1 LINK ≈ 274.974 STRK
Value in USD
≈ $87.88
Network Fee
0.104006 STRK

LINK to STRK conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 LINK≈ 2,749.74 STRK
50 LINK≈ 13,750.7 STRK
100 LINK≈ 27,501.8 STRK
500 LINK≈ 137,511 STRK
1,000 LINK≈ 275,023 STRK
5,000 LINK≈ 1,375,115 STRK

LINK to STRK daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest289.441 STRK
Lowest271.153 STRK
Change, 6 days+5.41%
289.441 271.153
Nov 16, 2026Nov 22, 2026
DateRate
1 LINK ≈ 289.441 STRK
1 LINK ≈ 286.976 STRK
1 LINK ≈ 283.017 STRK
1 LINK ≈ 282.009 STRK
1 LINK ≈ 280.026 STRK
1 LINK ≈ 271.153 STRK
1 LINK ≈ 274.574 STRK
Live Market Snapshot Updated Nov 22, 2026 23:24 UTC
1 LINK price
$9.12
1 STRK price
$0.0320
1 LINK buys
274.97355578 STRK

How to swap LINK to STRK

  1. Copy your STRK address

    Open your wallet's receive screen for STRK on Starknet and copy the address it shows, after checking that the wallet names the same network. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LINK amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The STRK estimate under it already has the payout fee taken out.

  3. Send LINK to the deposit address

    Press Exchange Now. Your order page shows a one-time Polygon PoS deposit address: send the amount you entered in one transaction. Send from a wallet set to Polygon PoS that holds enough POL for gas; some wallets still label that balance MATIC.

  4. Follow the order until STRK arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the STRK is in your wallet.

What the LINK to STRK swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Starknet network fee for your payout. You pay the Polygon PoS gas fee yourself, in POL: the gas the transfer uses times the base fee plus a tip, and most wallets suggest both. A token transfer on Polygon PoS runs the token's contract, so it uses more gas than a plain POL transfer, and that gas is paid in POL.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the STRK you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LINK to STRK at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Chainlink (Polygon) (LINK) Starknet (STRK)
Network Polygon PoS Starknet
Type ERC-20 token Token
Contract 0x53E0bc…aBad39 0x04718f…7c938D
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.001443 LINK ≈ 0.104 STRK
Route Cross-chain: Polygon PoS to Starknet
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0039355 LINK
Account / ID Not needed to start a swap

How long the LINK to STRK swap takes

The LINK to STRK swap is three waits in a row: the Polygon PoS network confirms your deposit, the exchange partner swaps it, and the Starknet network delivers the payout. Polygon PoS finalizes blocks with milestones once validators holding two thirds of the stake agree, and a finalized block cannot be reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.

  2. Polygon PoS milestones finalize it

    A deposit whose max fee is below the base fee, or that waits behind an earlier pending transaction, can stay pending until you speed it up.

  3. Exchange and STRK payout

    The partner swaps the LINK and sends STRK. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout confirmed on Starknet

    Your wallet lists the STRK as received once Starknet has confirmed the payout.

Your STRK address for the payout

A Starknet receiving address is 0x followed by 64 hex characters. The swap form accepted that format in our checks. It rejected a 40-character Ethereum address, so do not paste one for a Starknet payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An address for STRK on another network: the same coin on a different network is a separate asset, and a payout sent there can be lost.
  • An exchange address used without the memo or tag the exchange asks for, which it needs to credit the payout to you.
  • A token contract address copied from an explorer instead of the address of your own wallet.

Receiving STRK on Starknet: address and memo

Memo or tagNot used on this network.
Block explorerstarkscan.co

Send LINK on the right network

On the sending side, send LINK only on Polygon PoS, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the STRK arrives

The payout is an ordinary Starknet transaction from the exchange partner to your address. Your wallet shows it once it has seen the transaction, often as pending at first, and counts it as received once the network has confirmed it. If nothing shows, check that the wallet is set to Starknet and, for a token, that it displays this token. To move the STRK later, the same wallet also needs the coin Starknet charges fees in, which is usually its own coin.

If the address belongs to an exchange, check that the exchange accepts STRK on Starknet, what its minimum deposit is and whether it needs a memo or tag; exchanges credit deposits by their own rules. To check the payout yourself, look up the payout hash from the order page in a Starknet block explorer.

If your LINK deposit is slow or stuck

Look up the transaction hash on PolygonScan. A deposit that stays pending usually has a max fee below the current base fee, which every transaction must pay, or a tip too small to be picked. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If PolygonScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LINK to STRK swap

Your deposit is public on Polygon PoS: your sending address, the deposit address, the amount and the fee show on PolygonScan, and they stay there. The payout is recorded on Starknet too, where its amount and your receiving address are usually visible to anyone with a block explorer. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep some POL on Polygon PoS for gas and check which network your wallet is on, since POL also exists as a token on Ethereum.
  • Copy your STRK address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LINK to STRK Frequently Asked Questions

How do I swap LINK to STRK?

Enter the LINK amount and your STRK address in the form at the top, press Exchange Now, and send LINK on Polygon PoS to the one-time deposit address on your order page. After the Polygon PoS network confirms the deposit, the exchange partner sends STRK on Starknet to your address. No account or email is needed.

How much STRK do I get for 1 LINK?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to STRK calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LINK to STRK take?

There is no set time: the Polygon PoS network confirms the deposit first, then the exchange partner swaps it and sends the STRK payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LINK to STRK?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Chainlink to Starknet without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the STRK I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.

How do I swap STRK back to LINK?

Use the STRK to LINK page, linked next to the swap form. It works the same way in reverse: paste a Polygon PoS address, then send STRK to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps