Exchange Currencies Track Order Guides Telegram bot

Swap Chainlink (LINK) to Bitlight (LIGHT) with no sign-up

Enter the LINK amount, paste a BNB Smart Chain address from your own wallet, then send LINK on Polygon PoS to the one-time deposit address on your order page. Once the Polygon PoS network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LIGHT on BNB Smart Chain straight to your address.

Swap LIGHT to LINK instead

Rate
1 LINK ≈ 43.2132 LIGHT
Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LINK to LIGHT exchange rate

The LINK to LIGHT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in LIGHT after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

LINK to LIGHT Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LINK Polygon ERC-20
You get (estimate)
LIGHT BNB Chain BEP-20
432.131533 LIGHT
Rate
1 LINK ≈ 43.2132 LIGHT
Value in USD
≈ $88.15
Network Fee
0.0273005 LIGHT

LINK to LIGHT conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 LINK≈ 432.132 LIGHT
50 LINK≈ 2,160.88 LIGHT
100 LINK≈ 4,321.81 LIGHT
500 LINK≈ 21,609.3 LIGHT
1,000 LINK≈ 43,218.6 LIGHT
5,000 LINK≈ 216,093 LIGHT

LINK to LIGHT daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest44.4664 LIGHT
Lowest37.359 LIGHT
Change, 6 days+14.79%
44.4664 37.359
Nov 16, 2026Nov 22, 2026
DateRate
1 LINK ≈ 44.4664 LIGHT
1 LINK ≈ 43.7009 LIGHT
1 LINK ≈ 40.1681 LIGHT
1 LINK ≈ 38.2977 LIGHT
1 LINK ≈ 38.4655 LIGHT
1 LINK ≈ 37.359 LIGHT
1 LINK ≈ 38.7364 LIGHT
Live Market Snapshot Updated Nov 22, 2026 19:31 UTC
1 LINK price
$9.15
1 LIGHT price
$0.2040
1 LINK buys
43.2131533 LIGHT

LINK to LIGHT market price range

Over the last 30 days, 1 LINK was worth between 38.449 and 80.359 LIGHT at market prices.

Oct 8, 2026Low 38.449 · High 80.359 LIGHTNov 6, 2026

Market price of 1 LINK in LIGHT over the last 30 days

Based on daily market prices, checked on Nov 7, 2026. This is not your swap rate: the estimate in the swap form includes fees and moves with the market.

How to swap LINK to LIGHT

  1. Copy your LIGHT address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LINK amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LIGHT estimate under it already has the payout fee taken out.

  3. Send LINK to the deposit address

    Press Exchange Now. Your order page shows a one-time Polygon PoS deposit address: send the amount you entered in one transaction. Send from a wallet set to Polygon PoS that holds enough POL for gas; some wallets still label that balance MATIC.

  4. Follow the order until LIGHT arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LIGHT is in your wallet.

What the LINK to LIGHT swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the Polygon PoS gas fee yourself, in POL: the gas the transfer uses times the base fee plus a tip, and most wallets suggest both. A token transfer on Polygon PoS runs the token's contract, so it uses more gas than a plain POL transfer, and that gas is paid in POL.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LIGHT you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LINK to LIGHT at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Chainlink (Polygon) (LINK) Bitlight (LIGHT)
Network Polygon PoS BNB Smart Chain
Type ERC-20 token BEP-20 token
Contract 0x53E0bc…aBad39 0x477c2c…203c0e
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 0.001443 LINK ≈ 0.02743 LIGHT
Route Cross-chain: Polygon PoS to BNB Smart Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0027822 LINK
Account / ID Not needed to start a swap

How long the LINK to LIGHT swap takes

The LINK to LIGHT swap is three waits in a row: the Polygon PoS network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. Polygon PoS finalizes blocks with milestones once validators holding two thirds of the stake agree, and a finalized block cannot be reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.

  2. Polygon PoS milestones finalize it

    A deposit whose max fee is below the base fee, or that waits behind an earlier pending transaction, can stay pending until you speed it up.

  3. Exchange and LIGHT payout

    The partner swaps the LINK and sends LIGHT. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your LIGHT address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for LIGHT on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving LIGHT on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Send LINK on the right network

On the sending side, send LINK only on Polygon PoS, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the LIGHT arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the LIGHT later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this LIGHT stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits LIGHT on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your LINK deposit is slow or stuck

Look up the transaction hash on PolygonScan. A deposit that stays pending usually has a max fee below the current base fee, which every transaction must pay, or a tip too small to be picked. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.

Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If PolygonScan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LINK to LIGHT swap

Your deposit is public on Polygon PoS: your sending address, the deposit address, the amount and the fee show on PolygonScan, and they stay there. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Keep some POL on Polygon PoS for gas and check which network your wallet is on, since POL also exists as a token on Ethereum.
  • Copy your LIGHT address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LINK to LIGHT Frequently Asked Questions

How do I swap LINK to LIGHT?

Enter the LINK amount and your LIGHT address in the form at the top, press Exchange Now, and send LINK on Polygon PoS to the one-time deposit address on your order page. After the Polygon PoS network confirms the deposit, the exchange partner sends LIGHT on BNB Smart Chain to your address. No account or email is needed.

How much LIGHT do I get for 1 LINK?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to LIGHT calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LINK to LIGHT take?

There is no set time: the Polygon PoS network confirms the deposit first, then the exchange partner swaps it and sends the LIGHT payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LINK to LIGHT?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Chainlink to Bitlight without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the LIGHT I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.

How do I swap LIGHT back to LINK?

Use the LIGHT to LINK page, linked next to the swap form. It works the same way in reverse: paste a Polygon PoS address, then send LIGHT to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps