Swap Chainlink (LINK) to Starknet (STRKERC20) with no sign-up
Enter the LINK amount, paste an Ethereum address from your own wallet, then send LINK on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends STRKERC20 on Ethereum straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The LINK to STRKERC20 rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in STRKERC20 after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
LINK to STRKERC20 Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
LINKArbitrumERC-20
You get (estimate)
STRKERC20EthereumERC-20
Rate
1 LINK ā 274.709 STRKERC20
Value in USD
ā $87.58
Network Fee
3.8522715 STRKERC20
LINK to STRKERC20 conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest286.093 STRKERC20
Lowest268.079 STRKERC20
Change, 6 days+6.72%
286.093268.079Nov 16, 2026Nov 22, 2026
Date
Rate
1 LINK ā 286.093 STRKERC20
1 LINK ā 284.429 STRKERC20
1 LINK ā 282.577 STRKERC20
1 LINK ā 282.466 STRKERC20
1 LINK ā 280.056 STRKERC20
1 LINK ā 268.659 STRKERC20
1 LINK ā 268.079 STRKERC20
Live Market SnapshotUpdated Nov 22, 2026 22:48 UTC
1 LINK price
$9.01
1 STRKERC20 price
$0.0319
1 LINK buys
274.70933202 STRKERC20
How to swap LINK to STRKERC20
1
Copy your STRKERC20 address
Open your wallet with Ethereum mainnet selected and copy your 0x address from its receive screen; ETH and every ERC-20 token use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the LINK amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The STRKERC20 estimate under it already has the payout fee taken out.
3
Send LINK to the deposit address
Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until STRKERC20 arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the STRKERC20 is in your wallet.
What the LINK to STRKERC20 swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Ethereum network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending LINK on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the LINK.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the STRKERC20 you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
LINK to STRKERC20 at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Chainlink (Arbitrum One) (LINK)
Starknet (Ethereum) (STRKERC20)
Network
Arbitrum One
Ethereum
Type
ERC-20 token
ERC-20 token
Contract
0xf97f4dā¦539FB4
0xCa1400ā¦d42766
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
ā 0.003132 LINK
ā 3.912 STRKERC20
Route
Cross-chain: Arbitrum One to Ethereum
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0368858 LINK
Account / ID
Not needed to start a swap
How long the LINK to STRKERC20 swap takes
The LINK to STRKERC20 swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the Ethereum network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.
2Arbitrum One sequences the deposit
The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.
3Exchange and STRKERC20 payout
The partner swaps the LINK and sends STRKERC20. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on Ethereum
Your wallet shows the payout once it is in a block. About 15 minutes later, two epochs on, Ethereum finalizes that block.
Your STRKERC20 address for the payout
An Ethereum address is 0x followed by 40 hexadecimal characters, 42 in total. Mixed-case letters are a checksum (EIP-55), not a different address.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for STRKERC20 on another network, such as BNB Smart Chain or Base: the exchange may not credit a payout on Ethereum.
A token contract address copied from Etherscan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A smart contract wallet such as a Safe, which exists only on networks where it was deployed and can fail to receive ETH from some contracts.
On the sending side, send LINK only on Arbitrum One, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout shows in your wallet once a block includes it, and you can use it from then on. Ethereum finalizes a block after two epochs of 32 slots, about 15 minutes, and after that only a network attack costing many billions of dollars could change it. You need no ETH to receive the payout, because the sender pays the gas. Moving the STRKERC20 later costs gas paid in ETH, so keep some ETH at the same address. If the token does not show in your wallet, add it by its contract address.
If the address belongs to an exchange, check that the exchange credits STRKERC20 on Ethereum at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Ethereum explorer such as Etherscan.
If your LINK deposit is slow or stuck
Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.
Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your LINK to STRKERC20 swap
Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your 0x address are public on Etherscan, and so is everything that address does later on Ethereum. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your STRKERC20 address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
LINK to STRKERC20 Frequently Asked Questions
How do I swap LINK to STRKERC20?
Enter the LINK amount and your STRKERC20 address in the form at the top, press Exchange Now, and send LINK on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends STRKERC20 on Ethereum to your address. No account or email is needed.
How much STRKERC20 do I get for 1 LINK?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to STRKERC20 calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does LINK to STRKERC20 take?
There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the STRKERC20 payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for LINK to STRKERC20?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Chainlink to Starknet without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the STRKERC20 I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.
How do I swap STRKERC20 back to LINK?
Use the STRKERC20 to LINK page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send STRKERC20 to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.