Exchange Currencies Track Order Guides Telegram bot

Swap Chainlink (LINK) to Bitcoin BEP2 (BTCB) with no sign-up

Enter the LINK amount, paste a BNB Smart Chain address from your own wallet, then send LINK on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends BTCB on BNB Smart Chain straight to your address.

Swap BTCB to LINK instead

Rate
1 LINK ā‰ˆ 0.00014028 BTCB
Network Fee
-
Deposit Fee
-

Enter an address on the BNB Smart Chain (BEP-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

LINK to BTCB exchange rate

The LINK to BTCB rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several LINK amounts come to in BTCB after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

LINK to BTCB Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

LINK Arbitrum ERC-20
You get (estimate)
BTCB BNB Chain BEP-20
0.0014028 BTCB
Rate
1 LINK ā‰ˆ 0.00014028 BTCB
Value in USD
ā‰ˆ $87.77
Network Fee
0 BTCB

LINK to BTCB conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10 LINKā‰ˆ 0.0014028 BTCB
50 LINKā‰ˆ 0.00701575 BTCB
100 LINKā‰ˆ 0.0140319 BTCB
500 LINKā‰ˆ 0.0701614 BTCB
1,000 LINKā‰ˆ 0.140323 BTCB
5,000 LINKā‰ˆ 0.701618 BTCB

LINK to BTCB daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.000144418 BTCB
Lowest0.000139685 BTCB
Change, 6 days+1.77%
0.000144418 0.000139685
Nov 16, 2026Nov 22, 2026
DateRate
1 LINK ā‰ˆ 0.000142159 BTCB
1 LINK ā‰ˆ 0.000144206 BTCB
1 LINK ā‰ˆ 0.000144418 BTCB
1 LINK ā‰ˆ 0.000143815 BTCB
1 LINK ā‰ˆ 0.000142008 BTCB
1 LINK ā‰ˆ 0.000139849 BTCB
1 LINK ā‰ˆ 0.000139685 BTCB
Live Market Snapshot Updated Nov 22, 2026 22:34 UTC
1 LINK price
$9.03
1 BTCB price
$62,565.30
1 LINK buys
0.00014028 BTCB

How to swap LINK to BTCB

  1. Copy your BTCB address

    Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the LINK amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The BTCB estimate under it already has the payout fee taken out.

  3. Send LINK to the deposit address

    Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until BTCB arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the BTCB is in your wallet.

What the LINK to BTCB swap costs

Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. Sending LINK on Arbitrum One still costs gas, charged in ETH on Arbitrum One, so most wallets need some ETH there as well as the LINK.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the BTCB you get per LINK drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

LINK to BTCB at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Chainlink (Arbitrum One) (LINK) Bitcoin BEP2 (BTCB)
Network Arbitrum One BNB Smart Chain
Type ERC-20 token BEP-20 token
Contract 0xf97f4d…539FB4 0x7130d2…3ead9c
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ā‰ˆ 0.003132 LINK None listed
Route Cross-chain: Arbitrum One to BNB Smart Chain
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0074657 LINK
Account / ID Not needed to start a swap

How long the LINK to BTCB swap takes

The LINK to BTCB swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the LINK, and the order page moves from waiting to confirming once the deposit is found.

  2. Arbitrum One sequences the deposit

    The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.

  3. Exchange and BTCB payout

    The partner swaps the LINK and sends BTCB. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on BNB Smart Chain

    Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.

Your BTCB address for the payout

BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for BTCB on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
  • A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.

Receiving BTCB on BNB Smart Chain: address and memo

Memo or tagNot used on this network.
Block explorerbscscan.com

More about swapping on BNB Smart Chain

Send LINK on the right network

On the sending side, send LINK only on Arbitrum One, the network your order page names. LINK sent on another network does not reach the deposit address. LINK exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the BTCB arrives

The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the BTCB later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this BTCB stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.

If the address belongs to an exchange, check that the exchange credits BTCB on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.

If your LINK deposit is slow or stuck

Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.

Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your LINK to BTCB swap

Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
  • Copy your BTCB address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

LINK to BTCB Frequently Asked Questions

How do I swap LINK to BTCB?

Enter the LINK amount and your BTCB address in the form at the top, press Exchange Now, and send LINK on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends BTCB on BNB Smart Chain to your address. No account or email is needed.

How much BTCB do I get for 1 LINK?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the LINK to BTCB calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does LINK to BTCB take?

There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the BTCB payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for LINK to BTCB?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Chainlink to Bitcoin BEP2 without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the BTCB I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less LINK arrived than you entered.

How do I swap BTCB back to LINK?

Use the BTCB to LINK page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send BTCB to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps