Enter the JOE amount, paste your 0x address on zkSync Era from your own wallet, then send JOE on the Avalanche C-Chain to the one-time deposit address on your order page. Once the Avalanche C-Chain network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ETH on zkSync Era straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The JOE to ETH rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
JOE to ETH Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
JOEAvalancheARC-20
You get (estimate)
ETHzkSync
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 22:25 UTC
1 ETH price
$1,759.33
How to swap JOE to ETH
1
Copy your ETH address
Open your wallet with zkSync Era selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the JOE amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ETH estimate under it already has the payout fee taken out.
3
Send JOE to the deposit address
Press Exchange Now. Your order page shows a one-time Avalanche C-Chain deposit address: send the amount you entered in one transaction. Send from a wallet set to the Avalanche C-Chain that holds enough AVAX on the C-Chain for gas; AVAX on the X-Chain or P-Chain cannot pay it.
4
Follow the order until ETH arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ETH is in your wallet.
What the JOE to ETH swap costs
Two costs come out of the estimate before you see it: the exchange margin and the zkSync Era network fee for your payout. You pay the C-Chain gas fee yourself, in AVAX: the gas charged, which is at least half the gas limit your wallet sets, times the base fee plus a tip, and both are burned. A token transfer runs the token's contract, so it uses more gas than a plain AVAX transfer, and that gas is paid in AVAX on the C-Chain.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ETH you get per JOE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
JOE to ETH at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
JOE
Ethereum (ZkSync Era) (ETH)
Network
Avalanche C-Chain
zkSync Era
Type
ARC-20 token
Native coin
Contract
0x6e84a6…bC0fDd
-
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
-
≈ 0.00021 ETH
Route
Cross-chain: Avalanche C-Chain to zkSync Era
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
27.9649149 JOE
Account / ID
Not needed to start a swap
How long the JOE to ETH swap takes
The JOE to ETH swap is three waits in a row: the Avalanche C-Chain network confirms your deposit, the exchange partner swaps it, and the zkSync Era network delivers the payout. A C-Chain transaction is final once Avalanche consensus accepts its block, in about a second, and accepted blocks are never reorganized; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the JOE, and the order page moves from waiting to confirming once the deposit is found.
2C-Chain consensus accepts the block
An accepted block is final. The node executes it after acceptance, so receipts and new balances appear once that is done.
3Exchange and ETH payout
The partner swaps the JOE and sends ETH. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on zkSync Era
Your wallet lists it once a zkSync Era block includes the transaction, as long as the wallet is set to zkSync Era.
Your ETH address for the payout
A receiving address on zkSync Era is 0x followed by 40 hexadecimal characters. The swap form accepted that format in our checks. Do not paste an address from another network.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another network: the payout is sent on zkSync Era, a separate chain.
An address at a wallet or exchange that does not support zkSync Era, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on zkSync Era: getting a payout back then depends on deploying that wallet there.
A token contract address copied from explorer.zksync.io instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
This page pays ETH on zkSync Era. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.
The payout is a zkSync Era transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to zkSync Era. The network's docs say received assets can be used right away, while the batch holding the transfer is still on its way to final settlement on Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. zkSync Era holds each withdrawal for at least 3 hours as a security measure; after that, anyone can finalize it on Ethereum, which sends the funds to the recipient address there. ETH is the base token of zkSync Era and pays its fees, so the payout itself covers gas when you move it, or anything else on zkSync Era, later.
If the address belongs to an exchange, check that it accepts this coin on zkSync Era and what its minimum deposit is; for a token, check the contract the exchange lists for zkSync Era, since a token's contract there always differs from its Ethereum one. To check the payout yourself, open the payout hash from the order page in a zkSync Era explorer such as explorer.zksync.io.
If your JOE deposit is slow or stuck
Look up the transaction hash on Snowtrace. A deposit that stays pending usually has a max fee below the base fee bound of the next block, which rises while the C-Chain is busier than its target, or it waits behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Snowtrace marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. Only the exchange can speed up a withdrawal it sent for you.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your JOE to ETH swap
Your deposit is public on the Avalanche C-Chain: your sending address, the deposit address, the amount and the fee show on Snowtrace, and they stay there. The payout, its amount and your receiving address are public on explorer.zksync.io, where anyone who knows the address can see its whole history on zkSync Era. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
If your AVAX sits on the X-Chain or P-Chain, move it to the C-Chain in your wallet first, because only C-Chain AVAX pays C-Chain gas.
Copy your ETH address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
JOE to ETH Frequently Asked Questions
How do I swap JOE to ETH?
Enter the JOE amount and your ETH address in the form at the top, press Exchange Now, and send JOE on the Avalanche C-Chain to the one-time deposit address on your order page. After the Avalanche C-Chain network confirms the deposit, the exchange partner sends ETH on zkSync Era to your address. No account or email is needed.
How much ETH do I get for 1 JOE?
Type 1 into the JOE to ETH calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does JOE to ETH take?
There is no set time: the Avalanche C-Chain network confirms the deposit first, then the exchange partner swaps it and sends the ETH payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for JOE to ETH?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap JOE to Ethereum without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive ETH on another network?
Yes, through a different entry in the coin list, since this page pays ETH on zkSync Era. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the ETH I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less JOE arrived than you entered.
How do I swap ETH back to JOE?
Use the ETH to JOE page, linked next to the swap form. It works the same way in reverse: paste an Avalanche C-Chain address, then send ETH to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. Fees and the minimum in the facts table are typical figures with their check date.