Exchange Currencies Track Order Guides Telegram bot

Swap Hyperliquid (HYPE) to Stellar (XLM) with no sign-up

Enter the HYPE amount, paste a Stellar G address from your own wallet, then send HYPE on HyperEVM to the one-time deposit address on your order page. Once the HyperEVM network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends XLM straight to your address.

Swap XLM to HYPE instead

Rate
1 HYPE ≈ 476.2606 XLM
Network Fee
-
Deposit Fee
-

Enter an address on the Stellar network. Coins sent to an address on another network can be lost.

This coin requires a memo/tag. Funds sent without it may be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

HYPE to XLM exchange rate

The HYPE to XLM rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several HYPE amounts come to in XLM after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

HYPE to XLM Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

HYPE HyperEVM
You get (estimate)
XLM Stellar
476.2606409 XLM
Rate
1 HYPE ≈ 476.261 XLM
Value in USD
≈ $63.45
Network Fee
0.02 XLM

HYPE to XLM conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1 HYPE≈ 476.261 XLM
5 HYPE≈ 2,381.78 XLM
10 HYPE≈ 4,763.69 XLM
50 HYPE≈ 23,818.9 XLM
100 HYPE≈ 47,637.9 XLM
500 HYPE≈ 238,190 XLM

HYPE to XLM daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest501.934 XLM
Lowest474.137 XLM
Change, 6 days−0.42%
501.934 474.137
Nov 16, 2026Nov 22, 2026
DateRate
1 HYPE ≈ 474.137 XLM
1 HYPE ≈ 474.493 XLM
1 HYPE ≈ 498.639 XLM
1 HYPE ≈ 486.955 XLM
1 HYPE ≈ 491.575 XLM
1 HYPE ≈ 501.934 XLM
1 HYPE ≈ 476.141 XLM
Live Market Snapshot Updated Nov 22, 2026 12:21 UTC
1 HYPE price
$64.79
1 XLM price
$0.1332
1 HYPE buys
476.2606409 XLM

How to swap HYPE to XLM

  1. Copy your XLM address

    Open your Stellar wallet's receive screen and copy the account address that starts with G, from an account that already holds XLM. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.

  2. Enter the HYPE amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The XLM estimate under it already has the payout fee taken out.

  3. Send HYPE to the deposit address

    Press Exchange Now. Your order page shows a one-time HyperEVM deposit address: send the amount you entered in one transaction. Send from a wallet set to HyperEVM, chain ID 999, with the HYPE in its HyperEVM balance; Hyperliquid's spot balances on HyperCore are a separate part of the chain.

  4. Follow the order until XLM arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the XLM is in your wallet.

About Swapping Hyperliquid (HyperEVM) to Stellar

Your HYPE leaves a 0x wallet on HyperEVM, where it is the native coin, and XLM arrives on the Stellar network at a Stellar address you control. No account or email address is part of the process. A common reason to swap HYPE to XLM: a trader with gains in the Hyperliquid ecosystem wants funds on Stellar, where transfers settle in seconds and the base fee is a tiny fraction of one XLM, for payments or for cashing out through a Stellar anchor.

HYPE on this page lives on HyperEVM, Hyperliquid's EVM-compatible chain, and not in the HyperCore trading account that holds perps and spot balances. If your HYPE is in that trading account, move it to HyperEVM first, then send from a wallet with a little extra HYPE for gas. XLM is the native coin of Stellar, a payments network that reaches agreement through the Stellar Consensus Protocol. Your payout address starts with G, and the widget offers a memo field that exchange deposits require.

Ahead of the deposit, the widget shows a floating-rate estimate of the XLM you will get, with the Stellar network fee for the payout already taken out. If the HYPE price moves while your deposit is confirming, the final XLM figure can shift a little. Timing depends on your HyperEVM deposit confirming and on processing, and once the payout goes out, Stellar closes a new ledger roughly every five seconds. The order page shows each stage and a transaction ID for any Stellar block explorer.

What the HYPE to XLM swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Stellar network fee for your payout. You pay the HyperEVM gas fee yourself in HYPE, for HYPE and tokens alike; like Ethereum it has a base fee and a priority fee, both burned, and your wallet sets them. When you send HYPE, the gas comes out of the same HyperEVM balance, so the wallet needs the amount you entered plus the gas.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the XLM you get per HYPE drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

HYPE to XLM at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Hyperliquid (HyperEVM) (HYPE) Stellar (XLM)
Network HyperEVM Stellar
Type Native coin Native coin
Memo / tag Not needed Required with your address
Network fee (typical, checked Nov 22, 2026) ≈ 0.00021 HYPE ≈ 0.02 XLM
Route Cross-chain: HyperEVM to Stellar
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 0.0027595 HYPE
Account / ID Not needed to start a swap

How long the HYPE to XLM swap takes

The HYPE to XLM swap is three waits in a row: the HyperEVM network confirms your deposit, the exchange partner swaps it, and the Stellar network delivers the payout. HyperEVM blocks are part of Hyperliquid's own execution and run under its HyperBFT consensus; ordinary transfers like your deposit go into small blocks built about every second. The exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the HYPE, and the order page moves from waiting to confirming once the deposit is found.

  2. A HyperEVM block includes it

    A maximum fee below the current base fee leaves it waiting until the base fee falls or the fee is raised.

  3. Exchange and XLM payout

    The partner swaps the HYPE and sends XLM. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout in a closed ledger

    Your wallet shows the XLM once the ledger with the payout closes, usually a few seconds after it is sent, and the payment is final from then on.

Your XLM address for the payout

A Stellar account address starts with G and is 56 characters of capital letters and the digits 2 to 7. The swap form rejected a muxed address (starts with M, 69 characters) and a contract address (starts with C), so paste the G address and enter any memo separately.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. XLM can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:

  • Leaving out the memo of an exchange account: exchanges keep many customers in one Stellar account, and a payment without its memo can be lost or need manual tracing.
  • A new G address that holds no XLM yet: it is not an account until someone funds it, and a plain payment to it fails.

Receiving XLM on Stellar: address and memo

Memo or tagNeeded when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
Block explorerstellar.expert

After the XLM arrives

The payout is a Stellar payment, and it is final once the ledger that includes it closes, usually a few seconds after it is sent. Every Stellar account must keep a minimum balance in XLM, two base reserves plus more for each trustline or other entry it holds, and that part of the balance cannot be spent. Validators can vote to change the base reserve. Each later transaction also costs a small fee in XLM.

If the address belongs to an exchange, copy its G address and memo exactly as its Stellar deposit page shows them, and check its minimum deposit; exchanges that pool deposits in one account credit you by the memo. To check the payout yourself, open the payout hash from the order page in a Stellar explorer such as stellar.expert.

If your HYPE deposit is slow or stuck

Look up the transaction hash on hyperevmscan.io. If it is not there, check where you sent from: a transfer made from Hyperliquid's spot balances happens on HyperCore, and a wallet set to another EVM network sends on that network, but the order waits for a transfer on HyperEVM only.

HyperEVM uses a base fee and a priority fee like Ethereum, and its gas spikes when demand outruns its block space; a deposit with a maximum fee below the base fee then waits. Its onchain mempool accepts only the next 8 nonces of each address and prunes transactions older than 1 day, and a pruned transaction moves no coins. A wallet's speed up option sends a replacement with the same nonce and a higher fee; ask support before you make a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your HYPE to XLM swap

Your deposit is public: the amount, your sending address and the deposit address show on HyperEVM explorers such as hyperevmscan.io. The payout, its amount, your G address and any memo are visible to anyone on a Stellar explorer such as stellar.expert, and they stay in the ledger's history. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Send HYPE from a HyperEVM wallet address, not straight from your Hyperliquid trading account balance on HyperCore.
  • Keep a small amount of HYPE beyond the swap amount to pay the HyperEVM gas fee for the deposit.
  • Paste a Stellar public key starting with G as the payout address, never a 0x address from your EVM wallet.
  • Copy the memo exactly if your XLM address belongs to an exchange, because a missing memo can leave the deposit uncredited.
  • Set your wallet to HyperEVM and keep some HYPE in its HyperEVM balance for gas before you send the deposit.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.

HYPE to XLM Frequently Asked Questions

How do I swap HYPE to XLM?

Enter the HYPE amount and your XLM address in the form at the top, press Exchange Now, and send HYPE on HyperEVM to the one-time deposit address on your order page. After the HyperEVM network confirms the deposit, the exchange partner sends XLM to your address. No account or email is needed.

How much XLM do I get for 1 HYPE?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the HYPE to XLM calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does HYPE to XLM take?

There is no set time: the HyperEVM network confirms the deposit first, then the exchange partner swaps it and sends the XLM payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for HYPE to XLM?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Hyperliquid to Stellar without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Do I need a memo or tag to swap HYPE to XLM?

For the payout, only if your XLM address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.

Why is the XLM I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less HYPE arrived than you entered.

How do I swap XLM back to HYPE?

Use the XLM to HYPE page, linked next to the swap form. It works the same way in reverse: paste a HyperEVM address, then send XLM to the one-time deposit address.

What does a Stellar receiving address look like?

A standard Stellar public address is 56 characters long and starts with the letter G. It has nothing in common with the 0x addresses used on HyperEVM, so your EVM wallet cannot receive XLM. Copy the address from a Stellar wallet or from an exchange's XLM deposit page.

Why is part of my new XLM balance not spendable?

Stellar requires every account to keep a small base reserve of XLM that cannot be spent while the account exists. If your address is new, part of the XLM you receive is held as that reserve, so the spendable balance is a little below the total. This is a Stellar network rule, not an xswap.to charge.

What should I do if my XLM has not arrived?

Start on the order page, where the status runs from waiting for deposit through confirming, exchanging and sending to finished. If it says finished, look up the transaction ID on a Stellar block explorer and compare the address and memo. If it stalls, contact support on Telegram at @xswap_to with the transaction ID.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps