Exchange Currencies Track Order Guides Telegram bot

Swap Defi App (HOME) to Hyperliquid (HYPE) with no sign-up

Enter the HOME amount, paste your 0x address on HyperEVM from your own wallet, then send HOME on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends HYPE on HyperEVM straight to your address.

Swap HYPE to HOME instead

Rate
1 HOME ≈ 0.0000640931 HYPE
Network Fee
-
Deposit Fee
-

Enter an address on the HyperEVM network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

HOME to HYPE exchange rate

The HOME to HYPE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several HOME amounts come to in HYPE after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

HOME to HYPE Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

HOME Base ERC-20
You get (estimate)
HYPE HyperEVM
1.2818622 HYPE
Rate
1 HOME ≈ 0.0000640931 HYPE
Value in USD
≈ $81.95
Network Fee
0.00021 HYPE

HOME to HYPE conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
10,000 HOME≈ 0.638081 HYPE
50,000 HOME≈ 3.2132 HYPE
100,000 HOME≈ 6.43211 HYPE
500,000 HOME≈ 32.1833 HYPE
1,000,000 HOME≈ 64.3724 HYPE
5,000,000 HOME≈ 321.885 HYPE
10,000,000 HOME≈ 643.775 HYPE

HOME to HYPE daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.0000775843 HYPE
Lowest0.0000689982 HYPE
Change, 6 days−6.04%
0.0000775843 0.0000689982
Nov 16, 2026Nov 22, 2026
DateRate
1 HOME ≈ 0.0000689982 HYPE
1 HOME ≈ 0.0000775843 HYPE
1 HOME ≈ 0.0000758129 HYPE
1 HOME ≈ 0.0000743996 HYPE
1 HOME ≈ 0.0000743041 HYPE
1 HOME ≈ 0.0000754532 HYPE
1 HOME ≈ 0.0000734369 HYPE
Live Market Snapshot Updated Nov 22, 2026 10:39 UTC
1 HOME price
$0.00452541
1 HYPE price
$63.93
1 HOME buys
0.00006409 HYPE

How to swap HOME to HYPE

  1. Copy your HYPE address

    Open your wallet on HyperEVM, chain ID 999, which wallets may list as Hyperliquid, and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the HOME amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The HYPE estimate under it already has the payout fee taken out.

  3. Send HOME to the deposit address

    Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until HYPE arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the HYPE is in your wallet.

What the HOME to HYPE swap costs

Two costs come out of the estimate before you see it: the exchange margin and the HyperEVM network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending HOME on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the HOME.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the HYPE you get per HOME drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

HOME to HYPE at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Defi App (Base) (HOME) Hyperliquid (HyperEVM) (HYPE)
Network Base HyperEVM
Type ERC-20 token Native coin
Contract 0x4bfaa7…fc714f -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 85.27 HOME ≈ 0.00021 HYPE
Route Cross-chain: Base to HyperEVM
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 195.0568429 HOME
Account / ID Not needed to start a swap

How long the HOME to HYPE swap takes

The HOME to HYPE swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the HyperEVM network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the HOME, and the order page moves from waiting to confirming once the deposit is found.

  2. A Base block includes it

    A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.

  3. Exchange and HYPE payout

    The partner swaps the HOME and sends HYPE. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on HyperEVM

    Your wallet lists it once a HyperEVM block includes the transfer, as long as the wallet is set to HyperEVM.

Your HYPE address for the payout

A HyperEVM address is 0x followed by 40 hex characters. The swap form accepted that format in our checks. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange address that takes this coin only on HyperCore: Hyperliquid's docs say some exchanges support HYPE from HyperCore spot balances but not on HyperEVM.
  • Hyperliquid's HYPE transfer address 0x2222222222222222222222222222222222222222: HYPE sent there goes to the HyperCore balance of the sender, which for a payout is not you.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on HyperEVM: getting a payout back then depends on deploying that wallet there.

Receiving HYPE on HyperEVM: address and memo

Memo or tagNot used on this network.
Block explorerhyperevmscan.io

Send HOME on the right network

On the sending side, send HOME only on Base, the network your order page names. HOME sent on another network does not reach the deposit address. HOME exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.

After the HYPE arrives

The payout is a HyperEVM transfer, so it lands in your HyperEVM balance and shows in a wallet set to HyperEVM. Hyperliquid's spot and perp balances live on HyperCore, a separate part of the same blockchain, so the payout does not appear there by itself. To trade the HYPE on Hyperliquid's order books, move it to your HyperCore spot balance with the Transfer to/from EVM button in Hyperliquid's app; that transfer costs gas in HYPE.

If the address belongs to an exchange, confirm that it accepts this coin on HyperEVM itself, not only on HyperCore, and what its minimum deposit is. To check the payout yourself, open the payout hash from the order page in a HyperEVM explorer such as hyperevmscan.io.

If your HOME deposit is slow or stuck

Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.

If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your HOME to HYPE swap

Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout, its amount and your receiving address are public on HyperEVM explorers such as hyperevmscan.io, where anyone can look up that address. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
  • Copy your HYPE address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

HOME to HYPE Frequently Asked Questions

How do I swap HOME to HYPE?

Enter the HOME amount and your HYPE address in the form at the top, press Exchange Now, and send HOME on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends HYPE on HyperEVM to your address. No account or email is needed.

How much HYPE do I get for 1 HOME?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the HOME to HYPE calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does HOME to HYPE take?

There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the HYPE payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for HOME to HYPE?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Defi App to Hyperliquid without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Why is the HYPE I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less HOME arrived than you entered.

How do I swap HYPE back to HOME?

Use the HYPE to HOME page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send HYPE to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps