Exchange Currencies Track Order Guides Telegram bot

Swap Hamster Kombat (HMSTR) to Ethereum (ETH) with no sign-up

Enter the HMSTR amount, paste your 0x address on zkSync Era from your own wallet, then send HMSTR on TON to the one-time deposit address on your order page. Once the TON network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends ETH on zkSync Era straight to your address.

Swap ETH to HMSTR instead

Rate
1 HMSTR ≈ 0.000000082409 ETH
Network Fee
-
Deposit Fee
-

Enter an address on the zkSync Era network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

HMSTR to ETH exchange rate

The HMSTR to ETH rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several HMSTR amounts come to in ETH after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

HMSTR to ETH Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

HMSTR TON Jetton
You get (estimate)
ETH zkSync
0.0576862 ETH
Rate
1 HMSTR ≈ 0.0000000824089 ETH
Value in USD
≈ $100.81
Network Fee
0.00021 ETH

HMSTR to ETH conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
1,000,000 HMSTR≈ 0.0825152 ETH
5,000,000 HMSTR≈ 0.413568 ETH
10,000,000 HMSTR≈ 0.827385 ETH
50,000,000 HMSTR≈ 4.13792 ETH
100,000,000 HMSTR≈ 8.27608 ETH

HMSTR to ETH daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.0000000922106 ETH
Lowest0.0000000747128 ETH
Change, 6 days+15.13%
0.0000000922106 0.0000000747128
Nov 16, 2026Nov 22, 2026
DateRate
1 HMSTR ≈ 0.0000000860175 ETH
1 HMSTR ≈ 0.0000000922106 ETH
1 HMSTR ≈ 0.0000000803898 ETH
1 HMSTR ≈ 0.0000000780325 ETH
1 HMSTR ≈ 0.0000000801024 ETH
1 HMSTR ≈ 0.0000000778803 ETH
1 HMSTR ≈ 0.0000000747128 ETH
Live Market Snapshot Updated Nov 22, 2026 14:34 UTC
1 HMSTR price
$0.00015233
1 ETH price
$1,747.56
1 HMSTR buys
0.00000008 ETH

How to swap HMSTR to ETH

  1. Copy your ETH address

    Open your wallet with zkSync Era selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the HMSTR amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The ETH estimate under it already has the payout fee taken out.

  3. Send HMSTR to the deposit address

    Press Exchange Now. Your order page shows a one-time TON deposit address: send the amount you entered in one transaction. Send from any TON wallet; if the order page shows a memo, use one that has a Comment field and enter the memo there.

  4. Follow the order until ETH arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the ETH is in your wallet.

What the HMSTR to ETH swap costs

Two costs come out of the estimate before you see it: the exchange margin and the zkSync Era network fee for your payout. The fee for your TON deposit is paid in Gram (TON), by your wallet or, in apps with gasless transfers, by a relay service; validators set fee levels in the network configuration, so there is no higher rate to choose. A Jetton transfer such as HMSTR also attaches Gram (TON) to pay the token contracts, including opening the receiver's Jetton wallet if it has none; the unused part normally comes back to you.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the ETH you get per HMSTR drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

HMSTR to ETH at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset Hamster Kombat (HMSTR) Ethereum (ZkSync Era) (ETH)
Network TON zkSync Era
Type Jetton token Native coin
Contract EQAJ8uWd…drPcUo -
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 452.6 HMSTR ≈ 0.00021 ETH
Route Cross-chain: TON to zkSync Era
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 6300.7531249 HMSTR
Account / ID Not needed to start a swap

How long the HMSTR to ETH swap takes

The HMSTR to ETH swap is three waits in a row: the TON network confirms your deposit, the exchange partner swaps it, and the zkSync Era network delivers the payout. TON's masterchain produces a block about every 400 milliseconds, and the exchange partner swaps after your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the HMSTR, and the order page moves from waiting to confirming once the deposit is found.

  2. Masterchain block makes it final

    A TON transaction cannot be reversed once a masterchain block includes it, which takes about a second when the network runs normally.

  3. Exchange and ETH payout

    The partner swaps the HMSTR and sends ETH. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout lands on zkSync Era

    Your wallet lists it once a zkSync Era block includes the transaction, as long as the wallet is set to zkSync Era.

Your ETH address for the payout

A receiving address on zkSync Era is 0x followed by 40 hexadecimal characters. The swap form accepted that format in our checks. Do not paste an address from another network.

Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for Ethereum mainnet or another network: the payout is sent on zkSync Era, a separate chain.
  • An address at a wallet or exchange that does not support zkSync Era, which then cannot show or credit the payout.
  • A smart contract wallet address, such as a multisig, that exists on another network but not on zkSync Era: getting a payout back then depends on deploying that wallet there.
  • A token contract address copied from explorer.zksync.io instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.

Receiving ETH on zkSync Era: address and memo

Memo or tagNot used on this network.
Block explorerexplorer.zksync.io

Which network your ETH arrives on

This page pays ETH on zkSync Era. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout.

After the ETH arrives

The payout is a zkSync Era transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to zkSync Era. The network's docs say received assets can be used right away, while the batch holding the transfer is still on its way to final settlement on Ethereum.

Moving the payout to Ethereum mainnet later takes a bridge. zkSync Era holds each withdrawal for at least 3 hours as a security measure; after that, anyone can finalize it on Ethereum, which sends the funds to the recipient address there. ETH is the base token of zkSync Era and pays its fees, so the payout itself covers gas when you move it, or anything else on zkSync Era, later.

If the address belongs to an exchange, check that it accepts this coin on zkSync Era and what its minimum deposit is; for a token, check the contract the exchange lists for zkSync Era, since a token's contract there always differs from its Ethereum one. To check the payout yourself, open the payout hash from the order page in a zkSync Era explorer such as explorer.zksync.io.

If your HMSTR deposit is slow or stuck

A TON transfer runs as a chain of transactions, so success on your wallet's side does not prove the deposit arrived. Open your wallet's transaction in an explorer such as Tonviewer and follow it to the deposit address: a Jetton transfer with too little Gram (TON) attached can fail on the way, and a failed transfer may bounce back to you, minus fees.

If the transfer reached the deposit address but the order still says waiting, check that it carried the memo, if the order page showed one. If your wallet reports the transfer as expired or failed and the explorer shows nothing leaving your wallet, no coins were sent, and the wallet can sign a new transfer.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your HMSTR to ETH swap

Your deposit is public on TON: the sending wallet, the deposit address, the amount and any plain text comment, the memo included, can be read by anyone in an explorer. The payout, its amount and your receiving address are public on explorer.zksync.io, where anyone who knows the address can see its whole history on zkSync Era. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Leave some Gram (TON) in the wallet after the amount you send, because every TON transfer, Jetton transfers included, pays its fees in Gram (TON).
  • Copy your ETH address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

HMSTR to ETH Frequently Asked Questions

How do I swap HMSTR to ETH?

Enter the HMSTR amount and your ETH address in the form at the top, press Exchange Now, and send HMSTR on TON to the one-time deposit address on your order page. After the TON network confirms the deposit, the exchange partner sends ETH on zkSync Era to your address. No account or email is needed.

How much ETH do I get for 1 HMSTR?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the HMSTR to ETH calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does HMSTR to ETH take?

There is no set time: the TON network confirms the deposit first, then the exchange partner swaps it and sends the ETH payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for HMSTR to ETH?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap Hamster Kombat to Ethereum without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive ETH on another network?

Yes, through a different entry in the coin list, since this page pays ETH on zkSync Era. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the ETH I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less HMSTR arrived than you entered.

How do I swap ETH back to HMSTR?

Use the ETH to HMSTR page, linked next to the swap form. It works the same way in reverse: paste a TON address, then send ETH to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps