Swap Filecoin (FIL) to Toncoin (TON) with no sign-up
Enter the FIL amount, paste a TON wallet address from your own wallet, then send FIL to the one-time deposit address on your order page. Once the Filecoin network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends TON straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The FIL to TON rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several FIL amounts come to in TON after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.
FIL to TON Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
FILFilecoin
You get (estimate)
TONTON
Rate
1 FIL ≈ 0.532749 TON
Value in USD
≈ $107.78
Network Fee
0.0075 TON
FIL to TON conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.
Highest0.578898 TON
Lowest0.543105 TON
Change, 6 days−5.44%
0.5788980.543105Nov 16, 2026Nov 22, 2026
Date
Rate
1 FIL ≈ 0.543105 TON
1 FIL ≈ 0.553618 TON
1 FIL ≈ 0.555184 TON
1 FIL ≈ 0.557074 TON
1 FIL ≈ 0.555934 TON
1 FIL ≈ 0.578898 TON
1 FIL ≈ 0.574328 TON
Live Market SnapshotUpdated Nov 22, 2026 16:27 UTC
1 FIL price
$0.5498
1 TON price
$1.01
1 FIL buys
0.53274897 TON
How to swap FIL to TON
1
Copy your TON address
Open your TON wallet's receive screen and copy the address it shows, which usually starts with UQ, the non-bounceable form wallet apps use for receiving. Paste it into Recipient Address and compare the first and last characters. If the address comes from an exchange, also enter the memo it shows with the address.
2
Enter the FIL amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The TON estimate under it already has the payout fee taken out.
3
Send FIL to the deposit address
Press Exchange Now. Your order page shows a one-time Filecoin deposit address: send the amount you entered in one transaction. Send FIL from a wallet that holds it on Filecoin and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until TON arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the TON is in your wallet.
What the FIL to TON swap costs
Two costs come out of the estimate before you see it: the exchange margin and the TON network fee for your payout. You pay the Filecoin network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the TON you get per FIL drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
FIL to TON at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Filecoin (FIL)
Toncoin (TON)
Network
Filecoin
TON
Type
Native coin
Native coin
Memo / tag
Not needed
Required with your address
Network fee (typical, checked Nov 22, 2026)
≈ 0.006 FIL
≈ 0.0075 TON
Route
Cross-chain: Filecoin to TON
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.2292828 FIL
Account / ID
Not needed to start a swap
How long the FIL to TON swap takes
The FIL to TON swap is three waits in a row: the Filecoin network confirms your deposit, the exchange partner swaps it, and the TON network delivers the payout. The time Filecoin needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the FIL, and the order page moves from waiting to confirming once the deposit is found.
2Filecoin confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and TON payout
The partner swaps the FIL and sends TON. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on TON
Your wallet lists the TON under your address once the transfer is in a block, and a masterchain block then makes it final.
Your TON address for the payout
A TON wallet address is usually shown as 48 characters of letters, digits, hyphens and the underline sign, starting with UQ (non-bounceable, the form meant for wallets) or EQ (bounceable). The raw form is 0: followed by 64 hex characters. All forms point to the same account; for a new, unused wallet, give the UQ form.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. TON can also carry a memo. If your address comes from an exchange, enter the memo it gives you, because the exchange uses it to credit your account; a wallet you control usually needs none. Mistakes that cost a payout:
The EQ form of a wallet that has never sent anything: Gram (TON) sent in bounceable form to an undeployed wallet returns to the sender, so give the UQ form.
An exchange deposit address that needs a memo, entered without it or for a coin whose listing here has no memo field: the exchange cannot match the payout automatically.
A Jetton wallet or Jetton master address copied from an explorer: payouts must go to your regular wallet address, the one your wallet app shows.
Receiving TON on TON: address and memo
Memo or tag
Needed when the receiving wallet asks for one, which exchange accounts usually do. Enter it in the memo field of the form.
This page pays TON. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send FIL only on Filecoin, the network your order page names. FIL sent on another network does not reach the deposit address.
The payout is final once a masterchain block includes it, which normally takes about a second, and your wallet lists it under the address you pasted. If nothing shows, compare the wallet app's address with the one on the order page: one recovery phrase can control several TON wallets, one per wallet version, each with its own address and balance. TON sent to a wallet that has never sent anything stays in its address, and your wallet app deploys the wallet contract with your first outgoing transfer, usually paying for that from the balance.
If the address belongs to an exchange, check that the exchange gives it for TON deposits on the TON network, note its minimum deposit, and enter the memo it shows; when the form has no memo field for TON, receive to your own wallet instead. To check the payout yourself, open the payout hash from the order page in a TON explorer such as Tonviewer.
If your FIL deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Filecoin. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your FIL to TON swap
Your deposit is recorded on Filecoin for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your receiving address are visible to anyone in a TON explorer, together with your wallet's balance and token holdings. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send FIL only on Filecoin, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your TON address from the wallet's receive screen and compare its start and end after pasting.
Enter the memo your exchange gives you for TON, or the payout cannot be credited to your account.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
FIL to TON Frequently Asked Questions
How do I swap FIL to TON?
Enter the FIL amount and your TON address in the form at the top, press Exchange Now, and send FIL to the one-time deposit address on your order page. After the Filecoin network confirms the deposit, the exchange partner sends TON to your address. No account or email is needed.
How much TON do I get for 1 FIL?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the FIL to TON calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does FIL to TON take?
There is no set time: the Filecoin network confirms the deposit first, then the exchange partner swaps it and sends the TON payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for FIL to TON?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Filecoin to Toncoin without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Do I need a memo or tag to swap FIL to TON?
For the payout, only if your TON address belongs to an exchange: enter the memo it shows with the address. A wallet you control usually needs none.
Can I receive TON on another network?
Yes, through a different entry in the coin list, since this page pays TON. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the TON I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less FIL arrived than you entered.
How do I swap TON back to FIL?
Use the TON to FIL page, linked next to the swap form. It works the same way in reverse: paste a Filecoin address, then send TON to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.