Exchange Currencies Track Order Guides Telegram bot

Swap SynFutures (F) to Chainlink (LINK) with no sign-up

Enter the F amount, paste a Polygon PoS address from your own wallet, then send F on Base to the one-time deposit address on your order page. Once the Base network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends LINK on Polygon PoS straight to your address.

Swap LINK to F instead

Rate
1 F ≈ 0.000234775 LINK
Network Fee
-
Deposit Fee
-

Enter an address on the Polygon PoS (ERC-20) network. Coins sent to an address on another network can be lost.

Swap in Telegram

No Account Needed to Start

Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.

Updated Written and checked by the xswap.to team

F to LINK exchange rate

The F to LINK rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.

Type any amount into the calculator below for a live figure. The table under it shows what several F amounts come to in LINK after fees. It is worked out from the page's latest quote and carries that quote's time. The daily table tracks the market rate between the two coins on each recent day, before swap fees, from xswap.to's own price record.

F to LINK Calculator

Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.

F Base ERC-20
You get (estimate)
LINK Polygon ERC-20
11.7387335 LINK
Rate
1 F ≈ 0.000234775 LINK
Value in USD
≈ $106.79
Network Fee
0.0006602 LINK

F to LINK conversion table

Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
You sendYou get (estimate after fees)
50,000 F≈ 11.7387 LINK
100,000 F≈ 23.5599 LINK
500,000 F≈ 118.129 LINK
1,000,000 F≈ 236.341 LINK
5,000,000 F≈ 1,182.03 LINK
10,000,000 F≈ 2,364.15 LINK

F to LINK daily rate

Market rate before swap fees, from xswap.to's own daily price record, Nov 16, 2026 to Nov 22, 2026.

Highest0.000262311 LINK
Lowest0.000231652 LINK
Change, 6 days+5.29%
0.000262311 0.000231652
Nov 16, 2026Nov 22, 2026
DateRate
1 F ≈ 0.00024519 LINK
1 F ≈ 0.000244114 LINK
1 F ≈ 0.000243681 LINK
1 F ≈ 0.000262311 LINK
1 F ≈ 0.000236606 LINK
1 F ≈ 0.000231652 LINK
1 F ≈ 0.000232877 LINK
Live Market Snapshot Updated Nov 22, 2026 22:57 UTC
1 F price
$0.00220783
1 LINK price
$9.10
1 F buys
0.00023477 LINK

How to swap F to LINK

  1. Copy your LINK address

    Open your wallet with Polygon PoS selected, which wallets may list as Polygon or Polygon Mainnet, and copy your 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.

  2. Enter the F amount

    Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The LINK estimate under it already has the payout fee taken out.

  3. Send F to the deposit address

    Press Exchange Now. Your order page shows a one-time Base deposit address: send the amount you entered in one transaction. Send from a wallet switched to Base that holds some ETH on Base for gas, and check the network name on the confirmation screen before you approve.

  4. Follow the order until LINK arrives

    The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the LINK is in your wallet.

What the F to LINK swap costs

Two costs come out of the estimate before you see it: the exchange margin and the Polygon PoS network fee for your payout. You pay the Base network fee yourself, and Base charges it in ETH, for ETH and tokens alike: an execution fee on Base plus a fee for publishing the transaction to Ethereum, which your wallet estimates. Sending F on Base still costs gas, charged in ETH on Base, so most wallets need some ETH there as well as the F.

The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the LINK you get per F drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.

F to LINK at a glance

From live exchange data, refreshed hourly.

Item You send You receive
Asset SynFutures (Base) (F) Chainlink (Polygon) (LINK)
Network Base Polygon PoS
Type ERC-20 token ERC-20 token
Contract 0x2C2449…2E6eD6 0x53E0bc…aBad39
Memo / tag Not needed Not needed
Network fee (typical, checked Nov 22, 2026) ≈ 345.8 F ≈ 0.000666 LINK
Route Cross-chain: Base to Polygon PoS
Rate Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026) 768.6599193 F
Account / ID Not needed to start a swap

How long the F to LINK swap takes

The F to LINK swap is three waits in a row: the Base network confirms your deposit, the exchange partner swaps it, and the Polygon PoS network delivers the payout. Base builds a block every 200 milliseconds, and your deposit gets its first confirmation when one includes it. It becomes final once the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:

  1. Deposit sent and seen

    Your wallet broadcasts the F, and the order page moves from waiting to confirming once the deposit is found.

  2. A Base block includes it

    A maximum fee below the current base fee, or an older pending transaction from your account, can hold it back.

  3. Exchange and LINK payout

    The partner swaps the F and sends LINK. The status reaches sending, then finished, and the payout hash appears on the order page.

  4. Payout final on Polygon PoS

    Your wallet shows the payout once a block includes it, and a milestone then finalizes that block for good.

Your LINK address for the payout

Polygon PoS uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:

  • An exchange deposit address meant for LINK on Ethereum or another network: the 0x address can look the same, but the exchange may not credit a Polygon PoS payout.
  • A token contract address copied from PolygonScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
  • A multisig or other smart contract wallet deployed on another network but not on Polygon PoS, where a payout stays stuck unless the wallet can be recreated there.

Receiving LINK on Polygon PoS: address and memo

Memo or tagNot used on this network.
Block explorerpolygonscan.com

More about swapping on Polygon PoS

Which network your LINK arrives on

This page pays LINK on Polygon PoS. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.

Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send F only on Base, the network your order page names. F sent on another network does not reach the deposit address.

After the LINK arrives

The payout shows in your wallet once a block includes it, and a later milestone finalizes that block, after which it cannot be reorganized. You need no POL to receive the payout, because the sender pays the gas. A wallet that still shows MATIC as the network's own coin is showing the same POL balance under the old symbol. Moving the LINK later costs gas paid in POL, so keep some POL at that address. Some tokens have two versions on Polygon PoS with different contracts, such as native USDC and bridged USDC.e, and exchanges may accept only one.

If the address belongs to an exchange, check that the exchange credits LINK on Polygon PoS, not only on Ethereum, and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a Polygon PoS explorer such as PolygonScan.

If your F deposit is slow or stuck

Look up the transaction hash on Basescan. If it is not there, check which network your wallet sent on: the same 0x address exists on Ethereum, OP Mainnet and other EVM networks, but the order waits for a transfer on Base only. While Base throttles transactions to manage its data posting to Ethereum, even ones with a high priority fee can be delayed.

If your wallet still shows the deposit as pending, its maximum fee may be below the current base fee, its priority fee may be too low while demand is high, or an older pending transaction from your address may be holding it back. If your wallet offers speed up, use it on the oldest pending one: it sends a replacement with the same nonce and a higher fee. The replacement has a new hash, so give that one to support.

Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.

What others can see of your F to LINK swap

Your deposit is public: the amount, your sending address and the deposit address show on Basescan, and the transaction is also published to Ethereum. The payout, its amount and your 0x address are public on PolygonScan, and so is everything that address does later on Polygon PoS. The exchange partner that processes the swap sees both sides: your deposit and your payout address.

Before you send

  • Switch your wallet to Base and keep some ETH on Base for gas before you send, even when the deposit is a token.
  • Copy your LINK address from the wallet's receive screen and compare its start and end after pasting.
  • Send the amount you entered in one transaction, and let your wallet add its network fee on top.
  • Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.

F to LINK Frequently Asked Questions

How do I swap F to LINK?

Enter the F amount and your LINK address in the form at the top, press Exchange Now, and send F on Base to the one-time deposit address on your order page. After the Base network confirms the deposit, the exchange partner sends LINK on Polygon PoS to your address. No account or email is needed.

How much LINK do I get for 1 F?

The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the F to LINK calculator asks for a live estimate. No figure is written here, because the rate floats.

How long does F to LINK take?

There is no set time: the Base network confirms the deposit first, then the exchange partner swaps it and sends the LINK payout. The timing section on this page lists each stage, and the order page shows which one you are in.

Is there a minimum amount for F to LINK?

Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.

Can I swap SynFutures to Chainlink without KYC?

You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.

Can I receive LINK on another network?

Yes, through a different entry in the coin list, since this page pays LINK on Polygon PoS. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.

Why is the LINK I received different from the estimate?

The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less F arrived than you entered.

How do I swap LINK back to F?

Use the LINK to F page, linked next to the swap form. It works the same way in reverse: paste a Base address, then send LINK to the one-time deposit address.

About these numbers

The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. The daily rates come from xswap.to's own price record, one value per day, and show the market rate before swap fees. Fees and the minimum in the facts table are typical figures with their check date.

Guides for this swap

Related swaps

Popular swaps