Enter the ETH amount, paste an Avalanche C-Chain address from your own wallet, then send ETH on Linea to the one-time deposit address on your order page. Once the Linea network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends JOE on the Avalanche C-Chain straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The ETH to JOE rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
ETH to JOE Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHLinea
You get (estimate)
JOEAvalancheARC-20
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 22:25 UTC
1 ETH price
$2,221.34
How to swap ETH to JOE
1
Copy your JOE address
Open your wallet's C-Chain account, not its X-Chain or P-Chain one, and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The JOE estimate under it already has the payout fee taken out.
3
Send ETH to the deposit address
Press Exchange Now. Your order page shows a one-time Linea deposit address: send the amount you entered in one transaction. Send ETH from a wallet that holds it on Linea and also holds enough of the coin the network charges its fee in, usually its own coin.
4
Follow the order until JOE arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the JOE is in your wallet.
What the ETH to JOE swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Avalanche C-Chain network fee for your payout. You pay the Linea network fee for your deposit yourself, in the coin the network charges fees in, usually its own coin, and your wallet works it out when you send. The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the JOE you get per ETH drops near the minimum.
ETH to JOE at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (Linea) (ETH)
JOE
Network
Linea
Avalanche C-Chain
Type
Native coin
ARC-20 token
Contract
-
0x6e84a6…bC0fDd
Memo / tag
Not needed
Not needed
Route
Cross-chain: Linea to Avalanche C-Chain
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0005556 ETH
Account / ID
Not needed to start a swap
How long the ETH to JOE swap takes
The ETH to JOE swap is three waits in a row: the Linea network confirms your deposit, the exchange partner swaps it, and the Avalanche C-Chain network delivers the payout. The time Linea needs to confirm a deposit depends on the network's design and on how busy it is, and the exchange partner swaps only after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.
2Linea confirms the deposit
When the network is busy, a deposit sent with a low fee can wait longer for its first confirmation.
3Exchange and JOE payout
The partner swaps the ETH and sends JOE. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on the C-Chain
The block is final as soon as consensus accepts it, and your wallet shows the payout once the node has executed it.
Your JOE address for the payout
C-Chain addresses use the Ethereum format: 0x followed by 40 hexadecimal characters, the same address your wallet shows on Ethereum. X-Chain addresses look different (X-avax1 followed by a bech32 string), and P-Chain addresses start with P-avax1. An 0x address cannot receive X-Chain AVAX.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for JOE on another network: the 0x address can look the same, but the exchange may not credit a C-Chain payout.
A token contract address copied from Snowtrace instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on the Avalanche C-Chain, where a payout stays stuck unless the wallet can be recreated there.
Receiving JOE on Avalanche C-Chain: address and memo
On the sending side, send ETH only on Linea, the network your order page names. ETH sent on another network does not reach the deposit address. ETH exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is final once Avalanche consensus accepts its block, and accepted blocks are never reorganized. Your wallet shows the new balance after the node has executed that block. You need no AVAX to receive the payout, because the sender pays the gas. Moving the JOE later costs gas paid in AVAX on the C-Chain, so keep some AVAX at that address. If the token does not show in your wallet, add it by its contract address.
If the address belongs to an exchange, check that the exchange credits JOE on the Avalanche C-Chain at that address and what its minimum deposit is; a deposit on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in an Avalanche C-Chain explorer such as Snowtrace.
If your ETH deposit is slow or stuck
Look up the transaction ID from your wallet in a block explorer for Linea. If the explorer cannot find it, the transfer may never have been broadcast, so check your wallet's history first. If it is listed but not yet confirmed, the network may be busy or the fee may be below what it takes now; your wallet's help pages say whether a pending fee can be raised.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH to JOE swap
Your deposit is recorded on Linea for good, and on most networks its amount and both addresses can be read by anyone with a block explorer. The payout, its amount and your 0x address are public on Snowtrace, and so is everything that address does later on the C-Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send ETH only on Linea, the network your order page names, because a transfer on another network or to a wrong address cannot be reversed.
Copy your JOE address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ETH to JOE Frequently Asked Questions
How do I swap ETH to JOE?
Enter the ETH amount and your JOE address in the form at the top, press Exchange Now, and send ETH on Linea to the one-time deposit address on your order page. After the Linea network confirms the deposit, the exchange partner sends JOE on the Avalanche C-Chain to your address. No account or email is needed.
How much JOE do I get for 1 ETH?
Type 1 into the ETH to JOE calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does ETH to JOE take?
There is no set time: the Linea network confirms the deposit first, then the exchange partner swaps it and sends the JOE payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH to JOE?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to JOE without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the JOE I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.
How do I swap JOE back to ETH?
Use the JOE to ETH page, linked next to the swap form. It works the same way in reverse: paste a Linea address, then send JOE to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.