Enter the ETH amount, paste your 0x address on Base from your own wallet, then send ETH on Arbitrum One to the one-time deposit address on your order page. Once the Arbitrum One network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends B3 on Base straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The ETH to B3 rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms. Type any amount into the calculator below for a live figure.
ETH to B3 Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHArbitrum
You get (estimate)
B3BaseERC-20
Rate
-
Value in USD
-
Network Fee
-
Live Market SnapshotUpdated Nov 22, 2026 11:45 UTC
1 ETH price
$1,749.73
How to swap ETH to B3
1
Copy your B3 address
Open your wallet with Base selected as the network and copy the 0x address from its receive screen. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The B3 estimate under it already has the payout fee taken out.
3
Send ETH to the deposit address
Press Exchange Now. Your order page shows a one-time Arbitrum One deposit address: send the amount you entered in one transaction. Send from a wallet switched to Arbitrum One that holds some ETH there for gas, and check the network name on the confirmation screen before you approve.
4
Follow the order until B3 arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the B3 is in your wallet.
What the ETH to B3 swap costs
Two costs come out of the estimate before you see it: the exchange margin and the Base network fee for your payout. You pay the Arbitrum One network fee yourself, and the network charges it in ETH, for ETH and tokens alike. Your wallet shows one fee that covers the work on Arbitrum and a share of posting the data to Ethereum. When you send ETH, the fee normally comes out of the same ETH balance on Arbitrum One, so the wallet needs the amount you entered plus the fee. The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the B3 you get per ETH drops near the minimum.
ETH to B3 at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (Arbitrum) (ETH)
B3
Network
Arbitrum One
Base
Type
Native coin
ERC-20 token
Contract
-
0xB3B32F…dDB3B3
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00006 ETH
-
Route
Cross-chain: Arbitrum One to Base
Rate
Floating, estimate shown before you send
Account / ID
Not needed to start a swap
How long the ETH to B3 swap takes
The ETH to B3 swap is three waits in a row: the Arbitrum One network confirms your deposit, the exchange partner swaps it, and the Base network delivers the payout. Arbitrum One's sequencer, which orders transactions, confirms your deposit provisionally once it puts it in a block. The deposit is final when the batch holding it is posted to Ethereum and final there, and the exchange partner swaps after the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.
2Arbitrum One sequences the deposit
The sequencer puts it in a block or, if it cannot do so in time, drops it rather than leaving it pending.
3Exchange and B3 payout
The partner swaps the ETH and sends B3. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout lands on Base
Your wallet lists it once a Base block includes the transaction, as long as the wallet is set to Base.
Your B3 address for the payout
Base uses the Ethereum address format: 0x followed by 40 hexadecimal characters. Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for Ethereum mainnet or another layer 2 such as OP Mainnet: the payout is sent on Base, a separate chain.
An address at a wallet or exchange that does not support Base, which then cannot show or credit the payout.
A smart contract wallet address, such as a multisig, that exists on another network but not on Base: getting a payout back then depends on deploying that wallet there.
A token contract address copied from Basescan instead of your own wallet address: tokens sent to a contract that cannot handle them can be stuck for good.
On the sending side, send ETH only on Arbitrum One, the network your order page names. ETH sent on another network does not reach the deposit address. ETH exists on more than one network, and each is a separate entry in the coin list. Choose the entry that matches the network your coins are on before you create the order.
The payout is a Base transaction, not an Ethereum mainnet one, so a wallet set to Ethereum shows nothing of it; switch yours to Base. The coins can be moved again once the transaction is in a block, and transfers within Base do not wait for the window that applies to withdrawals to Ethereum.
Moving the payout to Ethereum mainnet later takes a bridge. Through Base's standard bridge, a withdrawal can be finalized on Ethereum only after a window of 5 days, or 1 day when both of Base's proof systems back it, and proving and finalizing it are transactions on Ethereum. Your wallet may list the B3 only after you add the token, and moving it later costs gas in ETH on Base, so keep some ETH there.
If the address belongs to an exchange, check that it accepts this coin on Base and what its minimum deposit is; for a token, check the contract address it accepts, not only the ticker. To check the payout yourself, open the payout hash from the order page in a Base explorer such as Basescan.
If your ETH deposit is slow or stuck
Look up the transaction hash on Arbiscan first. If Arbiscan has no record of it, check which network your wallet sent on: the same 0x address exists on Ethereum, Arbitrum Nova and other EVM networks, but the order waits for a transfer on Arbitrum One only. Most wallets work on one network at a time, so the wrong one is easy to pick.
Arbitrum One keeps no long pending pool: the sequencer holds a transaction for seconds, then puts it in a block or drops it, for example when the base fee has risen above the maximum fee your wallet set. A dropped transaction never runs, so nothing leaves your wallet. If the wallet still lists it as pending, its speed up option, where offered, sends it again with the same nonce, so only one copy can go through; ask support before you make a new transfer.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH to B3 swap
Your deposit is public: the amount, your sending address and the deposit address show on Arbiscan, and the transaction data is also posted to Ethereum. The payout, its amount and your receiving address are public on Basescan, where anyone who knows the address can see its whole history on Base. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Switch your wallet to Arbitrum One and keep some ETH there for gas before you send, even when the deposit is a token.
Copy your B3 address from the wallet's receive screen and compare its start and end after pasting.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
Bookmark the order page and save its Ref. ID, because the Track Order list is stored only in this browser.
ETH to B3 Frequently Asked Questions
How do I swap ETH to B3?
Enter the ETH amount and your B3 address in the form at the top, press Exchange Now, and send ETH on Arbitrum One to the one-time deposit address on your order page. After the Arbitrum One network confirms the deposit, the exchange partner sends B3 on Base to your address. No account or email is needed.
How much B3 do I get for 1 ETH?
Type 1 into the ETH to B3 calculator on this page for a live estimate after fees. No figure is written here, because the rate floats and a number in the text would soon be out of date.
How long does ETH to B3 take?
There is no set time: the Arbitrum One network confirms the deposit first, then the exchange partner swaps it and sends the B3 payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH to B3?
Yes, every pair has a minimum, and it moves with network conditions. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to B3 without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Why is the B3 I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.
How do I swap B3 back to ETH?
Use the B3 to ETH page, linked next to the swap form. It works the same way in reverse: paste an Arbitrum One address, then send B3 to the one-time deposit address.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later.