Swap Ethereum (ETH) to Polkadot (DOT) with no sign-up
Enter the ETH amount, paste a BNB Smart Chain address from your own wallet, then send ETH to the one-time deposit address on your order page. Once the Ethereum network has confirmed the deposit, the exchange partner swaps it at the floating rate and sends DOT on BNB Smart Chain straight to your address.
Swap without creating an account or uploading ID. xswap.to never asks for your seed phrase or private keys, and the exchanged coins go straight to your wallet. In rare cases the exchange partner's compliance check can pause a swap and ask for verification.
The ETH to DOT rate on this page is an estimate for a real swap after fees, so it reads a little lower than the ratio of the two market prices. It floats with the market until your deposit confirms.
Type any amount into the calculator below for a live figure. The table under it shows what several ETH amounts come to in DOT after fees. It is worked out from the page's latest quote and carries that quote's time.
ETH to DOT Calculator
Enter an amount to see about how much you would receive. The estimate uses the live floating rate and already includes the payout network fee.
ETHEthereum
You get (estimate)
DOTBNB ChainBEP-20
Rate
1 ETH ≈ 2,478.71 DOT
Value in USD
≈ $1,665.25
Network Fee
0.0047284 DOT
ETH to DOT conversion table
Estimates after fees, worked out from one live quote taken at . The rate floats: the calculator and the swap form show the live figure.
Live Market SnapshotUpdated Nov 22, 2026 04:46 UTC
1 ETH price
$1,704.90
1 DOT price
$0.6718
1 ETH buys
2478.7148096 DOT
How to swap ETH to DOT
1
Copy your DOT address
Open your wallet with BNB Smart Chain selected and copy your 0x address from its receive screen; BNB and BEP-20 tokens use that one address. Paste it into Recipient Address and compare the first and last characters.
2
Enter the ETH amount
Type it in the form at the top. If it is under the pair's minimum, the form shows that minimum and one tap fills it in. The DOT estimate under it already has the payout fee taken out.
3
Send ETH to the deposit address
Press Exchange Now. Your order page shows a one-time Ethereum deposit address: send the amount you entered in one transaction. Send from a wallet set to Ethereum mainnet that holds enough ETH for gas, and keep the max fee it suggests.
4
Follow the order until DOT arrives
The status moves from waiting to confirming, exchanging, sending and finished. Keep the transaction ID from the order page until the DOT is in your wallet.
About Swapping Ethereum to Polkadot (Binance Smart Chain)
When you swap ETH to DOT on this page, you send native ETH from Ethereum mainnet and receive native DOT on Polkadot Asset Hub, paid to a Polkadot wallet address you control. There is no account or signup. A typical reason for this route: you want DOT in your own Polkadot wallet without routing it through a centralized exchange account first.
Ethereum (ETH) is the native coin of the Ethereum proof-of-stake network and pays its gas. The DOT here is native DOT on Polkadot Asset Hub, the Polkadot system chain that holds DOT balances, listed as Polkadot AssetHub. That makes this a cross-chain swap, and the payout needs a Polkadot address that starts with 1, not a 0x address. No memo is required. Moving the DOT later costs a small fee in DOT.
Before you send anything, the widget gives a floating-rate estimate of how much DOT you will get. That figure already has the exchange margin and the Asset Hub fee for the payout taken out. If the market moves while your deposit is confirming, the final DOT amount can shift a little. Ethereum runs in 12-second slots, and the Asset Hub payout follows once the exchange step is done. Your order page shows each stage plus a transaction ID.
What the ETH to DOT swap costs
Two costs come out of the estimate before you see it: the exchange margin and the BNB Smart Chain network fee for your payout. You pay the Ethereum gas fee yourself, in ETH: the gas the transfer uses times the base fee plus a priority tip, and most wallets suggest both. The gas is paid from your ETH balance on top of the amount sent, so it does not reduce the ETH that reaches the deposit address.
The payout fee is a flat amount per payout, so it takes a larger share of a small swap, and the DOT you get per ETH drops near the minimum. The facts table below lists the typical network fees and the minimum with the date they were checked.
ETH to DOT at a glance
From live exchange data, refreshed hourly.
Item
You send
You receive
Asset
Ethereum (ETH)
Polkadot (Binance Smart Chain) (DOT)
Network
Ethereum
BNB Smart Chain
Type
Native coin
BEP-20 token
Contract
-
0x708360…873402
Memo / tag
Not needed
Not needed
Network fee (typical, checked Nov 22, 2026)
≈ 0.00006 ETH
≈ 0.004764 DOT
Route
Cross-chain: Ethereum to BNB Smart Chain
Rate
Floating, estimate shown before you send
Minimum to send (typical, checked Nov 22, 2026)
0.0001362 ETH
Account / ID
Not needed to start a swap
How long the ETH to DOT swap takes
The ETH to DOT swap is three waits in a row: the Ethereum network confirms your deposit, the exchange partner swaps it, and the BNB Smart Chain network delivers the payout. Ethereum runs in 12-second slots, each with one validator chosen to propose a block, though a slot is sometimes empty; the exchange partner swaps once your deposit has the confirmations it requires. In rare cases the partner's compliance check pauses an order, which adds time. The stages in order:
1Deposit sent and seen
Your wallet broadcasts the ETH, and the order page moves from waiting to confirming once the deposit is found.
2Ethereum includes it in a block
Each 12-second slot can add a block. A deposit whose max fee is below the base fee can wait until the base fee falls or you speed it up.
3Exchange and DOT payout
The partner swaps the ETH and sends DOT. The status reaches sending, then finished, and the payout hash appears on the order page.
4Payout final on BNB Smart Chain
Your wallet shows the payout once a block includes it, and in most cases the block is final within two blocks.
Your DOT address for the payout
BSC uses the Ethereum address format: 0x followed by 40 hexadecimal characters, and an Ethereum wallet's address works on BSC too. An address that starts with bnb1 belongs to the old BNB Beacon Chain, which stopped processing transactions in November 2024, so it cannot receive a BSC payout.
Copy the address from your wallet's receive screen, not from your transaction history, where a scammer's lookalike address can sit next to yours, and compare the first and last characters after pasting. A payout sent to a wrong address cannot be reversed. Mistakes that cost a payout:
An exchange deposit address meant for DOT on Ethereum or opBNB: the 0x address can look the same, but the exchange may not credit a BNB Smart Chain payout.
A token contract address copied from BscScan instead of your own wallet address: tokens sent to a contract that cannot handle them can be lost.
A multisig or other smart contract wallet deployed on another network but not on BNB Smart Chain, where a payout stays stuck unless the wallet can be recreated there.
Receiving DOT on BNB Smart Chain: address and memo
This page pays DOT on BNB Smart Chain. The same coin is listed on other networks too, each as its own entry in the coin list, and the links under this section open the ones open for payouts now.
Pick the entry before you press Exchange Now. The same coin on another network is a different asset to your wallet: balances do not carry over, moving it later takes another transfer, and an address on the wrong network can lose the payout. On the sending side, send ETH only on Ethereum, the network your order page names. ETH sent on another network does not reach the deposit address.
The payout shows in your wallet once a block includes it. BNB Smart Chain finalizes a block within two blocks when at least two thirds of validators vote; if too few vote, it falls back to probabilistic finality, where each further block makes the payout harder to reverse. You need no BNB to receive it, because the sender pays the gas. Moving the DOT later costs gas paid in BNB, so keep some BNB at that address. As a BEP-20 token, this DOT stays on BNB Smart Chain; moving it elsewhere takes a bridge or another swap.
If the address belongs to an exchange, check that the exchange credits DOT on BNB Smart Chain at that address and what its minimum deposit is; a deposit below the minimum or on a network it does not support may not be credited. To check the payout yourself, open the payout hash from the order page in a BNB Smart Chain explorer such as BscScan.
If your ETH deposit is slow or stuck
Look up the transaction hash on Etherscan. If it is still pending, its max fee is probably below the current base fee, which rises after blocks fuller than the target, or its tip is too small for validators to pick it. It can also wait behind an earlier pending transaction from your address with a lower nonce. If your wallet offers speed up, use it on the oldest pending one: the wallet resends the same transaction with the same nonce and a higher fee, so only one of the two can confirm.
Do not press cancel on a deposit, because a cancellation that confirms means nothing reaches the order. The sped-up version has a new hash, so give that one to support. If Etherscan marks the transaction as failed, the coins stayed in your wallet but the gas was spent, so ask support before you send again. A withdrawal from an exchange account can only be sped up by that exchange.
Never send the deposit a second time to speed things up: a second payment is a second deposit. If the order page has not moved on after your deposit confirmed, message @xswap_to on Telegram with the Ref. ID from the order page and your deposit hash.
What others can see of your ETH to DOT swap
Your deposit is public on Ethereum: your sending address, the deposit address, the amount and the fee show on Etherscan and any other explorer, and they stay there. The payout, its amount and your 0x address are public on BscScan, and so is everything that address does later on BNB Smart Chain. The exchange partner that processes the swap sees both sides: your deposit and your payout address.
Before you send
Send native ETH on Ethereum mainnet only, not ETH from Arbitrum, Base or the BEP-20 ETH listing on BNB Smart Chain.
Paste a Polkadot address that starts with 1 as the DOT receiving address, never a 0x address.
Expect a small DOT fee when you later move the coins, because fees on Asset Hub are normally paid in DOT.
If your wallet shows an address starting with 5, switch it to the Polkadot or Asset Hub network before you copy the address.
Leave enough ETH in your wallet for gas on top of what you send, because Ethereum rejects a transfer whose fee the balance cannot cover.
Send the amount you entered in one transaction, and let your wallet add its network fee on top.
ETH to DOT Frequently Asked Questions
How do I swap ETH to DOT?
Enter the ETH amount and your DOT address in the form at the top, press Exchange Now, and send ETH to the one-time deposit address on your order page. After the Ethereum network confirms the deposit, the exchange partner sends DOT on BNB Smart Chain to your address. No account or email is needed.
How much DOT do I get for 1 ETH?
The amount table in the rate section shows it for several sizes, as an estimate after fees with the time of the quote. For your own amount, the ETH to DOT calculator asks for a live estimate. No figure is written here, because the rate floats.
How long does ETH to DOT take?
There is no set time: the Ethereum network confirms the deposit first, then the exchange partner swaps it and sends the DOT payout. The timing section on this page lists each stage, and the order page shows which one you are in.
Is there a minimum amount for ETH to DOT?
Yes, every pair has a minimum, and it moves with network conditions. The facts table on this page lists the last checked figure. The swap form warns you when your amount is under the current one. A deposit below it cannot be swapped, and getting those coins back is not assured.
Can I swap Ethereum to Polkadot without KYC?
You need no account, and xswap.to asks for no ID. In rare cases the exchange partner's automated anti-money-laundering screening pauses a flagged swap and asks for verification, and the order then shows the status verifying. If that happens, message @xswap_to on Telegram with your transaction ID.
Can I receive DOT on another network?
Yes, through a different entry in the coin list, since this page pays DOT on BNB Smart Chain. The network section on this page links to the entries open for payouts now. Pick the entry before you press Exchange Now.
Why is the DOT I received different from the estimate?
The rate floats, so the market can move between the estimate and the moment your deposit confirms. A different deposit amount changes the payout too: if your wallet took its network fee out of the amount, less ETH arrived than you entered.
How do I swap DOT back to ETH?
Use the DOT to ETH page, linked next to the swap form. It works the same way in reverse: paste an Ethereum address, then send DOT to the one-time deposit address.
Is the DOT I receive native Polkadot or a token?
It is native DOT on Polkadot Asset Hub, listed as Polkadot AssetHub, not a token on another chain. Since the Asset Hub migration of November 2025, DOT balances that sat on the relay chain live on Asset Hub under the same addresses. The payout lands at your Polkadot address.
Will a Polkadot address starting with 1 work for this payout?
It will, because this payout is native DOT on Polkadot Asset Hub, which needs a Polkadot-format address that starts with 1. The form rejects the generic form starting with 5, the Kusama form and 0x addresses. Entering the wrong address format can mean the coins are lost for good.
Do I need DOT already to receive the payout?
You do not, because the payout network fee is already deducted from your estimate. You will need a little DOT later to send or move the coins out of that account, since fees on Asset Hub are normally paid in DOT.
Can I pay with ETH from Arbitrum or Base instead?
This pair only takes native ETH on Ethereum mainnet at the deposit address, so ETH sent from a layer 2 would not be credited. Arbitrum, Base, OP Mainnet and zkSync Era versions of ETH are separate options in the coin selector. Pick the matching one if your ETH sits on a layer 2.
Why did I get slightly less DOT than the first estimate?
Rates on xswap.to are floating, so the estimate can move if the market changes before your ETH deposit confirms. The payout network fee and exchange margin are already inside the estimate, so they are not charged on top. Small differences come from price movement during confirmation.
What should I do if my ETH to DOT order seems stuck?
Start with the order page and read its current status. If it still says waiting for deposit, look up your ETH transaction on Etherscan to confirm it reached the deposit address on mainnet. For anything that still looks off, Telegram support at @xswap_to can check it with your transaction ID.
About these numbers
The calculator and the swap form ask for a live estimate for the amount you type; if one fails to load, try again a few seconds later. The amount table is worked out from the page's latest quote and the network fees in it, so treat it as a guide and use the calculator for your own amount. Fees and the minimum in the facts table are typical figures with their check date.